|
post latest 1/4 and 1/8 mile times and 60ft.
I haven't been to the track in a while, waiting until i get on a chassis dyno and thinking i'm going to change over to e85. Anyway Post you're best times so far this year.
11.37 at 115.81 7.18 1/8 mile 1.58 60ft. |
Re: post latest 1/4 and 1/8 mile times and 60ft.
12.12 @ 106.34 1/4
7.64 @89.43 1/8 1.77 60ft |
Re: post latest 1/4 and 1/8 mile times and 60ft.
1.32
6.02 @ 116.7 9.45 @ 141.4 |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Updated 7/16/08
How is this for a "67-72 Trucks ET list" http://73-ls1.com/67trucksetlist/67_...ET_7_16_08.JPG Sortable Excel Version http://73-ls1.com/67trucksetlist/67_...t_7_16_08.xlsx If you can provide this info, I will try and stay on top of it at least once a week if not more. Name Date 60' 330' 1/8 ET 1/8 MPH 1000' 1/4 ET 1/4 MPH Year Weight Engine Platform (Cubic inches and SBC, BBC, BBF, LS-series, Hemi) Transmission Stall converter Power adder 1 Power adder 2 Power adder 3 Rear Gear Rear Tire Comments Either way mine is: 1.669 7.114 @ 96.178 11.282 @ 115.322 |
Re: post latest 1/4 and 1/8 mile times and 60ft.
So far, I have this.....
1.49 60' 6.80 @ 99 MPH 10.87 @ 122 MPH Going to try out the new 468 motor this weekend :metal: |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Just changed short blocks and haven't been to the track with the truck in a while (too busy playing with the car and Camino) But don't expect the change to a lighter better rotator to make any significant changes,,,,, 12.03 @ 107,. Typically mid 1.6 sixty's but have seen a couple of 1.60's on a good tight track, with a n/a pump gas small block.
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
7.27 @ 94 with a 1.55 60' in the 1/8. No quarter mile tracks close to me, so 1/8 mi. is all I've ran. This was ran on pump gas w/o n2o.
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
8.93 @ 151.00
5.71 @ 123.00 only a 1.32 60ft 10.90 @ 149.00 in s/st I'm hoping to better this after I freshen the motor and change the cam . |
Re: post latest 1/4 and 1/8 mile times and 60ft.
7.35 @93mph
1.67 60ft |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Updated 7/14/08...
Now, I know there are more trucks that belong on this list.. DJ??? |
Re: post latest 1/4 and 1/8 mile times and 60ft.
mine are in my sig. These were run on pass time and should air any day now! The episodes from montgomery started airing tonight!
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
Kevin, to help me out and not have to go through 30 pages on your truck :) can you give me some of the bullit points on you combo..
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
hey shaun. on my slow turd its a 69 not 67. but its all good cause everyone thinks it is a 67 cause its got the 67 front end.so i guess you can call it either, but its a 350 stock bottom end, TH-350, 3,000 stall, N20 adder, 4.10 rear gear, with a 325/50r15 MT street DR. comment=daily driven
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
Quote:
old combo since I blew it up and will be moving towards a much larger motor! 14 to 1 60 over 454 with Brodix aluminum heads. Dominator, Speedtech plate with 250 jets in it. Glide with ultra bell, ultra case and 1.80 straight cut gear set. Trailing arm rear with coilovers and an anti roll bar! 9 inch Ford rear with 4.30 pro gears. 35 spline gun drilled moser axles and a spool. Kevin P.S. We are gonna add almost 100 cubic inches to this combo. |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Sounds like a 555 or 565 is in your future . That oughta fly !
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
565
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
I've been eying this up, thinking next summer or fall maybe. Run N/A on pump gas for bracket racing, and leave my N2O on for fun.
http://www.ultrastreet.net/engines/632_classic.asp |
Re: post latest 1/4 and 1/8 mile times and 60ft.
newbie 6.81 1/8 @ 91.88
1.43 60ft first and only pass hit 3rd lost traction |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Quote:
WELCOME to the zoo that's pretty quick. |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Ok.. Updated with DJ's stuff and Raddracintrk..
I split the sheet so the there are 1/8 times and 1/4 times. I did this as some have only made 1/8 passes and I don't want to take away from how fast their trucks are moving setting them at the bottom of a 1/4 mile list. Couch, sorry.. I forgot to add your additional info. I added it to the sheet and it will be on the next update. |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Well I was hoping to have a better time for you to post up with my new setup, but a major head wind was effecting everyones times untill the evening when it cooled off and the wind died causing alot of breakouts, unfortunately I was in the trailer by then.
last years best was a 10.77 @124mph with a 1.56 60'. I have ran 1.53 60's but was bracket racing and had to let off so I didn't breakout, pretty sure I would have been in the high 10.6's that Sat. Old setup when the run was made: 489 BBC 150 shot 4128lbs. without driver Turbo 350 4500 stall 4.10 gears 29x14.5 tire New changes: 4003lbs. without driver 4.30 gear 31x16.5 tire |
Re: post latest 1/4 and 1/8 mile times and 60ft.
I wish I could lose 120 lbs. I am on a diet but I can't lose that much I'd weigh less than 100 lbs.
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
Quote:
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
DJ what's your truck weigh?
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
3222 with me in it!
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
djracer thanks for the welcome
69trk never thought truck would hook so hard with all stock hardware still smiling |
Re: post latest 1/4 and 1/8 mile times and 60ft.
heres my best out of three runs haven't been back since i got slicks and track bar.will post new times soon. as for now i got the slowest truck lol
60' 2.218 330 5.884 mph 62.30 1/8 8.943 mph 77.54 this run was with 454 th400 ford 9 in 4.56 gears spool 33x21.5x15 sportsmans |
Re: post latest 1/4 and 1/8 mile times and 60ft.
This should become a sticky IMO..
Post your newest info and I'll update the spreadsheet.. |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Maybe we can make it one oneday!
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
10.61@126.75 1.54 60'
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
7.18@93mph, 1.56 60ft...
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
I did more carb tuning.
11.98 at 109, had a 1.73 60ft and a good headwind so it improved. |
Re: post latest 1/4 and 1/8 mile times and 60ft.
ask and you shall recieve...it's sticky now
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
Jim... Glad to see you around :)
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
This was the end of last year. This year we get a new converter ,rear springs and spray it. Hope to get it in the 12s on the motor and 11s on the juice..
60' 1.872 330 5.432 1/8 8.405 mph 82.29 1000 11.006 1/4 13.225 mph 101.43 weight 4500 |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Name 71chevytruckguy
Date 03/07/09 60' 1.811 330' 5.453 1/8 ET 8.478 1/8 MPH 82.736 1000' n/a 1/4 ET n/a 1/4 MPH n/a Year 1969 Weight ??? Engine Platform (Cubic inches and SBC, BBC, BBF, LS-series, Hemi) 377 SBC Transmission Muncie M-20 Stall converter dumping the clutch at 4000rpm Power adder 1 none Power adder 2 Power adder 3 Rear Gear 4.88 Rear Tire 28x10.5 M/T ET drag Comments pump gas all motor Chris. |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Mine has a best of 7.36 @ 93mph in the 1/8th
That was a 1.61 60 ft. LWB, Trailing arms, 10 inch wheel and MT Drag Radial The new setup should be in the 6's...we will see soon |
Re: post latest 1/4 and 1/8 mile times and 60ft.
finally went out. i havent done anything to the truck except hook up the vacuum advance, tint the windows, and run premium. that open diff is killin me, i was thinking about going 305s in the rear or bigger. but i think a limited slip will really wake up the time and work great with the 275s. remember, im at 5000+ feet, so times are a little slower here. oh yeah, stock 8.5" 10 bolt with 2.73's. i was proud of me! ill get that lsd and see what happens, but i still really want some rallye wheels, money money money, damn it.
run #1 rt .655 60 2.638 1320 16.363 @ 81.44 run #2 rt .806 60 2.631 1320 17.614 @ 77.75 floor mat got stuck under gas pedal... Run #3 rt .555 60 2.844 1320 16.503 @ 85.41 run #4 rt .403 60 2.717 1320 16.356 @ 84.81 |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Well i finally made it to my local track first time ever with the truck it has alittle more in it need to change gears crossing the line in second gear
all motor passes 1st pass 1.68 60' 7.66 1/8 83.85 mph lifted early 2nd pass 1.60 60' 7.45 1/8 88.70 mph adjusted timing 3rd pass 1.75 60' 7.65 1/8 89.57 mph spun out of the hole _______________________________ 1968 c-10 stepside "THE GRAPE APE" all motor 1.56...60ft 7.41...1/8 89.41..1/8 |
Re: post latest 1/4 and 1/8 mile times and 60ft.
two new ones from 8/28/09
rt .508 60 2.897 660 10.893 @ 69.29 1320 16.679 @84.48 still having traction issues second run just had the track cleaned after a spill, i was first! i went against my dads 68 camaro:metal:, first time he raced it he started in third! luckily it was a bye run, still embarassing. second time we went up together, im on the left lane. 0.223 rt .244 2.510 60 2.723 6.840 330 6.832 10.400 660 10.132 69.82 mph1 74.39 13.393 990 12.890 16.169 1320 15.409 84.29 mph2 92.74 |
| All times are GMT -4. The time now is 06:12 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com