The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   Just got this in going to be parting it (https://67-72chevytrucks.com/vboard/showthread.php?t=325380)

teeitup 01-24-2009 02:40 PM

Just got this in going to be parting it
 
3 Attachment(s)
I haven't parted one of these years for a long time. Tailgate has no rust but has some dents on inside $40 plus shipping, See anything else you need ask and I'll price. I'm not real sure how much these years parts are worth I usually just mess with 67-72's. Thanks Randy

teeitup 01-24-2009 02:41 PM

Re: Just got this in going to be parting it
 
3 Attachment(s)
more

teeitup 01-24-2009 02:42 PM

Re: Just got this in going to be parting it
 
I'm trying to figure out what the wheels are worth, I'll post price on those in a bit.

N2TRUX 01-24-2009 03:29 PM

Re: Just got this in going to be parting it
 
Randy, when you get a list of known good parts please post prices along with what you want for the wheels.

ScottH 01-24-2009 03:54 PM

Re: Just got this in going to be parting it
 
Randy, I would be interested in prices on the gauge bezel, door panels, and dash pad if in good shape.

Thanks.

Scott

bucket 01-24-2009 04:17 PM

Re: Just got this in going to be parting it
 
hey randy. i'm interested in all the side trim if straight. thanks.

bucket 01-24-2009 04:20 PM

Re: Just got this in going to be parting it
 
what is under the hood? does it run?

teeitup 01-24-2009 05:36 PM

Re: Just got this in going to be parting it
 
Scott, they are not bad shape no cracks, some fading on top of door panels, the drivers has one dent but I think it will pop out real easily, I tried to get a pic of it. Red is faded some. Gauge bezel has some fading but not bad. $40 plus shipping all door panels stuff, gauge bezel, and dash piece. the dash pad was cracked badly.
Cole, $40 for all the trim if you come up and take it all off, I'd help too;), only dented up pieces are on drivers side rear of bed. Both front fender chrome has a screws in them, see pics. Sorry alreasdy sold the motor and tranny to a local guy.
More pices of stuff
drivers fender is good, been replaced $30 no shipping
spare tire carrier, $20 plus shipping
rear end $50
seat belts $40
aftermarket Kenwood radio and it works $25 shipped
ps box $25 plus shipping
disc brake front end complete $50
visors $10 plus shipping
AT steering column $40 plus shipping
Thanks Randy

teeitup 01-24-2009 05:38 PM

Re: Just got this in going to be parting it
 
5 Attachment(s)
pic1

teeitup 01-24-2009 05:39 PM

Re: Just got this in going to be parting it
 
4 Attachment(s)
pic2

teeitup 01-24-2009 05:53 PM

Re: Just got this in going to be parting it
 
$150 plus shipping for rims on it, no tires. Thanks Randy

brothers69c-10 01-24-2009 06:27 PM

Re: Just got this in going to be parting it
 
What are the mirrors like? Especially the drivers side. and how much. Still interested in those door and window cranks on the 67-72 forum, just waiting for payday.
Also interested in front sidemarker lights.

ScottH 01-24-2009 06:42 PM

Re: Just got this in going to be parting it
 
Randy, sounds good, LMK total with shipping to 08753. No hurry whenever u can is fine.

Scott

Castiron9 01-24-2009 06:51 PM

Re: Just got this in going to be parting it
 
OK.for us not so knowledgeable,what year is that truck.Thanks

teeitup 01-24-2009 06:59 PM

Re: Just got this in going to be parting it
 
4 Attachment(s)
brothers, here are pics of mirrors, they are different, For the drivers side and front side markers $20 plus shipping
Scott, I'll try to get you a quote Sunday
Rene, title says its a 1975
Thanks Randy

Stitch 01-24-2009 11:52 PM

Re: Just got this in going to be parting it
 
do you have pics of the trim around the back of cab and how much for shipping to 29040...also, if bucket doesn't want the side trim, I'll take all of it...also, pics and condition of tailgate band...and also how much for the door sill plates on the edge of the carpet by the doors...thanks

Chuck.

Walts_restoration 01-25-2009 12:09 AM

Re: Just got this in going to be parting it
 
tailgate and maybe front clip. Shame the guys want to steal her side trim.

Got any pics of the radio? is it digital or analog?

teeitup 01-25-2009 12:34 AM

Re: Just got this in going to be parting it
 
Chuck, sorry the trim would need to be picked up no shipping. I'll have to check out the door sill plates
Ryan, front clip has rust, I know the drivers fender is good with no rust. The radio is digital.
Thanks Randy

Walts_restoration 01-25-2009 12:41 AM

Re: Just got this in going to be parting it
 
ohlalaa, pics of the radio then, i want a good dual post. Is it removed yet? if it isnt id like a good distance of wire behind it, if you want i could sneak up there and do it myself.

how much rust is in the passenger? its just gonna go on the parts truck that gave its rust free front clip to my 77.

teeitup 01-25-2009 12:57 AM

Re: Just got this in going to be parting it
 
I'll get pics tomorrow, I listened to the KU game on it today. I'll also get some pics of the fenders and hood (front clip). I'd make you a good deal on the whole front clip if you took it off, $60 for it all and you can take the bumper too? But sorry the chrome on the fenders may be sold. So that would be $75 for front clip, radio and bumper. Thanks Randy

teeitup 01-25-2009 01:00 AM

Re: Just got this in going to be parting it
 
Heck you want to buy the whole truck MINUS interior pieces, chrome trim, wheels and tires, spare tire carrier, mirrors, motor and tranny?

Walts_restoration 01-25-2009 01:06 AM

Re: Just got this in going to be parting it
 
no i dont need another spare truck just laying around lol. But ya id be able to come take the front clip off. Old man may want some glass out of it, i dont know. Ill talk to him in the morning and let you know. i do want the radio though, does it look like this?

http://i7.photobucket.com/albums/y26.../theradio3.jpg

teeitup 01-25-2009 01:12 AM

Re: Just got this in going to be parting it
 
Come on you need one more truck down there!!;) I think the radio looks like that, or close to it. Thanks Randy

Walts_restoration 01-25-2009 01:18 AM

Re: Just got this in going to be parting it
 
Quote:

Originally Posted by teeitup (Post 3106158)
Come on you need one more truck down there!!;) I think the radio looks like that, or close to it. Thanks Randy

We are running out of room randy!! believe it or not. I gotta be at work tomorrow at 3, if all else fails hows monday night? or maybe tuesday during the day?

71chevytruckguy 01-25-2009 02:56 AM

Re: Just got this in going to be parting it
 
Put me in line for the radio. Thank, Chris.


All times are GMT -4. The time now is 05:30 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com