LS firewall harness routing
I'm doing a clean up on my 61 firewall and am looking for a stock cleaned up look not a custom look. I have already filled in multiple holes and drilled a new hole for the chassis wiring harness and am wanting to put the hole in for the engine harness. I have a stock truck 5.3 with a BP swap harness. The cab isn't on the frame and the frame is at another location. I am wanting to put the computer under the seat. Anyone have any pictures on where they ran the harness through the firewall?
|
Re: LS firewall harness routing
1 Attachment(s)
For me, this seamed like the most natural spot as all the wires in my harness came together at the rear passenger side of the motor. FWIW, I installed the comp under the dash, to the right of the column.
|
Re: LS firewall harness routing
2 Attachment(s)
Mounted my ecu on back of the cab, wire bundle under cab to back of the engine….
|
Re: LS firewall harness routing
Thanks for the replies. The back wall would be a good place to mount if I have enough length, I think the harness extends 4' from the back of the intake.
|
Re: LS firewall harness routing
Quote:
|
All times are GMT -4. The time now is 12:04 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com