The 1947 - Present Chevrolet & GMC Truck Message Board Network - A novice approach to 41 door half skins

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The pre 1947 Chevrolet & GMC Truck Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=202)

- - A novice approach to 41 door half skins (https://67-72chevytrucks.com/vboard/showthread.php?t=727245)

dennislbrooks

01-11-2017 08:07 PM

A novice approach to 41 door half skins

5 Attachment(s)

Any suggestions of better methods are welcome. I have had the same problem with 2 left doors where the distance between the vertical pre-bends are about 3/16" too narrow.

I would like to see the vendors/makers of the half skins to not put a vertical bend in the rearward edge of the skin ---add 1/8 of an inch--- and leave it flat. Front edge, bottom edge, and indent at the top are OK.

dennislbrooks

01-11-2017 08:09 PM

Re: A novice approach to 41 door half skins

5 Attachment(s)

more pics

dennislbrooks

01-11-2017 08:13 PM

Re: A novice approach to 41 door half skins

3 Attachment(s)

All welded, both side edges rolled. Bottom edge left to do tomorrow. I will pre-fit it before blocking.

All times are GMT -4. The time now is 03:17 AM.