The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)

- - LQ4 to Turbo 350 Flexplate mods (https://67-72chevytrucks.com/vboard/showthread.php?t=727475)

suburban99

01-14-2017 06:00 PM

LQ4 to Turbo 350 Flexplate mods

I am getting ready for my 6.0 LQ4 72 K10 swap. Engine is a 2002 and has the flat flexplate.
Does anyone have a picture or diagram of the elongated holes required to bolt the convertor of the turbo 350 to the LQ4? Thanks

TooTall

01-23-2017 11:26 AM

Re: LQ4 to Turbo 350 Flexplate mods

I took off the flex plate and held it to the converter with center adapter. It's maybe 1/8 to 3/8s off. I used a 5/8 drill bit and elongated the holes and cleaned them up.

All times are GMT -4. The time now is 11:14 PM.