The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   4x4 Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=141)
-   -   68 k20 (https://67-72chevytrucks.com/vboard/showthread.php?t=663613)

Tskeen 03-15-2015 07:53 PM
68 k20
 
2 Attachment(s)
Got the other side of the shackle flip kit done and cut off the overloads and the bump stops now to start on the rear end. I have to cut off the spring perches and shock mounts since it came out of a 1992 ford E350 van

argonaut 03-16-2015 02:04 AM
Re: 68 k20
 
The frame is looking good. More pics not less!

Tskeen 03-18-2015 07:05 PM
Re: 68 k20
 
1 Attachment(s)
Had a gap in the front of the rear lift springs so I made a couple spacers to fix it

Bladeboy1998 03-18-2015 09:11 PM
Re: 68 k20
 
Subbed! Can't wait to see this come together! We need more pics too

Tskeen 04-10-2015 10:00 PM
Re: 68 k20
 
1 Attachment(s)
Worked on the wheels today

Tskeen 04-10-2015 10:02 PM
Re: 68 k20
 
1 Attachment(s)
Got them back from powder coat and put in the PVC inserts from trail worthy fab

Tskeen 04-10-2015 10:04 PM
Re: 68 k20
 
1 Attachment(s)
Turner out really nice

Tskeen 04-12-2015 02:39 PM
Re: 68 k20
 
2 Attachment(s)
Got the rear end mocked up today now just got to get the other two wheels put together and it will roll

Tskeen 04-19-2015 12:37 PM
Re: 68 k20
 
2 Attachment(s)
I got it on all four finally :metal:

junksaver 04-19-2015 08:23 PM
Re: 68 k20
 
On your rear springs, did you install a spacer on each side of the spring or just one side? When do we see the rest of the truck?

Tskeen 04-22-2015 07:44 PM
Re: 68 k20
 
Just on one side so far haven't tightened everything up yet to see where the spacer will go or if I have to put one on each sid

Tskeen 09-23-2015 05:08 PM
Re: 68 k20
 
1 Attachment(s)
Got the high steer and crossover steering done

Tskeen 09-23-2015 05:09 PM
Re: 68 k20
 
1 Attachment(s)
Quote:
Originally Posted by Tskeen (Post 7318033)
Got the high steer and crossover steering done
slow but getting there

junksaver 09-24-2015 02:28 PM
Re: 68 k20
 
Looks good so far. Keep posting.

Tskeen 10-10-2015 07:42 PM
Re: 68 k20
 
1 Attachment(s)
Got the motor and trans in and cab on today

CanadianK10 10-10-2015 10:42 PM
Re: 68 k20
 
Trucks lookin great!

Tskeen 02-07-2016 01:31 PM
Re: 68 k20
 
2 Attachment(s)
Quote:
Originally Posted by Tskeen (Post 7336937)
Got the motor and trans in and cab on today
Got a little bit of a update

Tskeen 02-07-2016 01:35 PM
Re: 68 k20
 
1 Attachment(s)
Cut the back two crossmembers out of a 84 blazer and mocking up the gas tank

First c10 02-07-2016 05:09 PM
Re: 68 k20
 
This is exactly what I did. I used the front cross member and then adjusted it to the fit the tank to the stock rear cross member. I haven't put the skid plate on yet.
Looking good.

Tskeen 02-12-2016 08:29 PM
Re: 68 k20
 
Almost done with my instrument panel

Tskeen 02-12-2016 08:35 PM
Re: 68 k20
 
1 Attachment(s)
Quote:
Originally Posted by Tskeen (Post 7483972)
Almost done with my instrument panel
just got to get my fuel gauge

Tskeen 03-29-2016 07:12 PM
Re: 68 k20
 
1 Attachment(s)
Latest parts to my truck build

Tskeen 03-29-2016 07:15 PM
Re: 68 k20
 
1 Attachment(s)
Tow hooks and buddy buckets got all the hard to find parts


All times are GMT -4. The time now is 04:17 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com