The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   47-55.1 Cool truck (https://67-72chevytrucks.com/vboard/showthread.php?t=801879)

MiraclePieCo 02-27-2020 08:36 AM

Cool truck
 
2 Attachment(s)
Cool truck:

mr48chev 02-27-2020 04:18 PM

Re: Cool truck
 
Great looking truck. I was trying to figure out what event I saw it at.

Tempest67 02-27-2020 06:35 PM

Re: Cool truck
 
interesting how the running board is just used between the cab and the rear fender..... kinda like a stepside....that is a cool look

dsraven 02-27-2020 06:47 PM

Re: Cool truck
 
I noticed the same thing and wondered if the cab was widened.

nvrdone 02-28-2020 12:20 AM

Re: Cool truck
 
ok, after seeing this truck I went out & compared it to mine.
Here's what I see:
the cab has been channeled over the frame. not sure that the cab has been widened.
The top has been chopped and the rear window raised to match the tops of the doors.
there is no filler between the running board and the bed. looks like the bed sides have been extended down to meet the running boards.
Looks like the front edge of the rear fender has been shortened to match the rear.
Looks like the hood has been pancaked.
The headlights have been peaked.
the stake pockets have been molded in , the rears wrap around to meet the rear roll pan.
there's probably much more that ive missed but any way you "slice it" that's a lot of work. but it definately changes the look without spoiling the original design.
I like it.

PDW HOTRODS 02-28-2020 01:01 PM

Re: Cool truck
 
Looks like the body has had a couple inches taken out of the height and 1 grill bar removed also.

mr48chev 02-28-2020 04:54 PM

Re: Cool truck
 
It does looked Sectioned along with the chop. There is far more work in that truck than your eye catches at first glance.

I've seen a couple that had the fenders raised on the cab to give the sectioned look with only the hood being actually sectioned.

mongocanfly 02-28-2020 05:33 PM

Re: Cool truck
 
1 Attachment(s)
Heres a pic and some Info from the 30th annual Pacific northwest nationals...

Making the road trip from Eugene, Oregon, Ron and Lois Beard’s 1948 Chevy pickup has a chop top and a serious, in-the-weeds hunkered stance. The running gear consists of a 327-inch V8 engine and a 700R4 automatic transmission.

mongocanfly 02-28-2020 05:37 PM

Re: Cool truck
 
3 Attachment(s)
And some more..

mongocanfly 02-28-2020 05:43 PM

Re: Cool truck
 
And the write up done on the truck....https://www.hotrod.com/articles/near...eam-came-true/

mr48chev 02-28-2020 06:59 PM

Re: Cool truck
 
That is a good article on the truck.

MiraclePieCo 02-28-2020 09:17 PM

Re: Cool truck
 
That dash is gorgeous! And some serious pie-cutting done on that hood!

joedoh 02-28-2020 11:26 PM

Re: Cool truck
 
nice job on the hood section and keeping good proportions, chopping the AD top makes the body tall and the nose too 'roman'.


Quote:

But rather than sourcing a thick, heavy, '50s frame that needed boxing and at the very least an IFS clip or crossmember, Ron picked one up that already had that. He found an '80s S-10 frame.

do tell ron, do tell

mr48chev 02-29-2020 03:11 AM

Re: Cool truck
 
It rather sounded like the writer had never heard of S-10 swaps before.

At first look i didn't think it had a 5 inch chop. Photos can be deceiving though.

At any rate it is one nice truck with some nice ideas in it.

MARTINSR 02-29-2020 05:23 PM

Re: Cool truck
 
Just rolling here, looks like a 4" chop, a 3-4" section and simply lowered so much that the bottoms of the fenders are shortened with the running boards being removed. The left the front of the fenders stock and raised the front bumper eliminating the lower grille bar.

Brian

MARTINSR 02-29-2020 06:47 PM

Re: Cool truck
 
5 Attachment(s)
I saw that truck at the Goodguys in Pleasanton California a few years ago. It is a beauty for sure!

Brian

MARTINSR 02-29-2020 06:50 PM

Re: Cool truck
 
2 Attachment(s)
Yeah, I took a bunch of photos, it got my attention.

Brian

MARTINSR 02-29-2020 06:53 PM

Re: Cool truck
 
4 Attachment(s)
Every friggin inch of this thing has been touched!

Brian


All times are GMT -4. The time now is 09:52 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com