correct length of 350 oil dipstick
I lost the original dipstick the my 79 and so replaced it with a junyard dipstick but now it seems like it is to long. I just changed oil 5 quarts and it is way over the full line. I thought sbc dipsticks were all the same but I guess not. Can someone give me the correct length? So when I go back to the junkyard I can get the right one.
Thanks |
Re: correct length of 350 oil dipstick
Get the tube with it.
|
Re: correct length of 350 oil dipstick
I hate to replace the tube. My 76 350 dipstick is 18 1/2" from under the cap to the end.
|
Re: correct length of 350 oil dipstick
If you know for sure the amount oil that your truck took you could just re-mark the dip-stick. Just do not use any van dip-stick in your truck cut it down re-mark it. you have to get the same engine and oil pan as your had( yr, dip stick side left or right, in-let tube style, stock pan or not )
I hope some of this may help |
Re: correct length of 350 oil dipstick
I have one on the wall from a 75 350. Dipstick measures 19 1/2 and tube measures 6 1/2 from top of tube to block
|
Re: correct length of 350 oil dipstick
1 Attachment(s)
Looks like these dip sticks are all over the place.
My 75 350 has a 8 inch long tube and a 21 inch long shaft. |
Re: correct length of 350 oil dipstick
76 350. 21” dipstick with a green cap end.
|
Re: correct length of 350 oil dipstick
Quote:
|
Re: correct length of 350 oil dipstick
On my hot rod builds I use an aftermarket stick.... Add 4 quarts of oil with a new filter.....Start the car, run it a minute or so, check and mark the stick, add the last quart, run the car, mark the stick, done
|
All times are GMT -4. The time now is 07:50 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com