Do these caps work with these rims?
2 Attachment(s)
I'm looking to pick up these original rims, they are 16X5, 6 lugs and I need to know if my caps will work on them for my 62 4WD suburban before I buy the wrong rims.
Thanks, AJ Bolt Pattern |
Re: Do these caps work with these rims?
They look correct to me....but Aerotruk can give you the best answer on the 16" rims.
|
Re: Do these caps work with these rims?
Wherefore art though Aerotruk? :)
|
Re: Do these caps work with these rims?
Factorystock or Aerotruk63 both seem to have gone through the wheel/hubcap
fitment routine thoroughly, so they could answer definitively, however, if you are in a hurry for an answer so as not to lose out on a deal, I'd guess they will fit. Six lug means 1/2 ton, regardless of wheel size. The caps shown are for 1/2 ton, nub type wheels, which those pictured are. If they are cheap enough, just get them and hope I'm not wrong. Good luck. Edit: call the seller and ask the approximate dimension of the nub diameter. If his measurement is even close to your hubcap opening, they will fit. Usually if a hubcap does not fit, it's not a close miss, but way off. |
Re: Do these caps work with these rims?
Those caps are 10 3/16 diameter. Have the seller measure the diameter as mentioned.
|
Re: Do these caps work with these rims?
You mean the diameter of the nubs right?
|
Re: Do these caps work with these rims?
They should though never hurts to measure.
|
All times are GMT -4. The time now is 06:00 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com