67-72 Front Crossmember
 

I need to find a straight and solid front crossmember. It not the engine & suspension support crossmember. I'm looking for the structural brace forward of that for frame support.

This is my broken and bent one now.
https://i.imgur.com/gajSZ0jm.jpg?1

Re: 67-72 Front Crossmember
 

I have one 75 plus shipping, I'll grab you some pictures Thursday if still interested.

Re: 67-72 Front Crossmember
 

Here you go

Re: 67-72 Front Crossmember
 

Is the metal is split next to that hole on the bottom or is that something else?

If it's split, where do I send the money?

Re: 67-72 Front Crossmember
 

That's a piece of wire tied on there, send me your zip and I can get a shipping quote. Pp works for me if you have that, if not money order works also.

Re: 67-72 Front Crossmember
 

Fantastic!

Zip is 75234.

I'll PM you my full contact info.

Re: 67-72 Front Crossmember
 

That worked out well. Post a WTB for a 67-72 part on the Pre-47 parts board and bingo! :lol: No point in moving now I guess :)

Re: 67-72 Front Crossmember
 

LOL, it just happened to catch my eye on the last post section so I checked it out!

Re: 67-72 Front Crossmember
 

The funny thing is that was the post showing on the main page since 10/15 and it just caught my eye yesterday. Before looking at the post it made me wonder if maybe guys were doing 67-72 truck clips on Advance Designs :lol:

Re: 67-72 Front Crossmember
 

The irony in what you just said, I convinced my dad to use one on his. Doing a cummins swap and needed a good suspension setup that kept it 8 lug. A 5/8 steel plate on each side used as a shim, drill a few holes, put on a rack and pinion and done!!! Frame rails have the same taper front to back just 1.25” narrower is all.

Re: 67-72 Front Crossmember
 

Well there ya go! It really is a thing. I think this is the most interesting, and gainful, thread I had ever seen! Happy New Year! Keep 'em rollin'!