The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988-1998 GMT400 Chevy & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=11)
-   -   Lots of 88-04 Stuff for sale (https://67-72chevytrucks.com/vboard/showthread.php?t=115258)

99-2door 08-11-2004 04:05 PM

Lots of 88-04 Stuff for sale
 
Have the folowing items for sale:

96 5.0L vortec with 4L60e auto

96 Short fleet bed red with black 2-tone $400

98 Short fleet bed Green with tan 2-tone $500


96 Complete 5.7L Vortec Injection and harness, all accesories and 4L80e 100K
$1750


01 6.0L Engine complete with all accessories and harness +ECM 115K $1950
(Matching steering column, dash harness and BCM available)

01 4L80e 4x4 with manual shift transfer case. $700

94 NV4500 from K3500 with transfer case. Originally a 6.5L diesel truck. Now behind a 96 5.7L Vortec.
$400 for trans with bellhousing

99 -3.42 open diff rear complete, 6-lug drum brakes,from my 99 2dr Tahoe, same as 4x4 pick-up 10 bolt 100K $250

95 -3.42 G80 locking rear diff for 2wd 5 lug drum brakes, complete 10 bolt rare 2wd locker $400

96- 3.73 14 bolt open diff 8-lug from c2500 $250


2001 4.10 G80 disc brakes 8-lug 14 bolt from K2500HD Also have matching front diff with 4.10s $650 for rear


Rear sway bars from 99 4x4 Tahoes. 2 available. With links and brackets
$50 each

94 red bench seat with fold down armrest for driver, great condition $250

96 tan power door panels all trim available

96 tilt & cruise auto steering column.




For more info on any of these parts IM me or post here. Engines, tranny and parts I can ship at buyer's expense. Cabs and beds must be picked up here in Broken Bow, OK 74728
Thanks
:bowtie:

Custom 68 08-11-2004 04:21 PM

that 6.0 l would sure be nice to get. A bit too far to drive right now to get it though.

grayw0lf 08-11-2004 04:35 PM

I'm interested in the Vortec heads for a good price.

1972C10 08-11-2004 06:35 PM

Would you swap a step bed for a fleet? Friend of mine has a 93 with a step bed needs tailgate but i imagine he would get one to swap He would prefer a fleetside /

99-2door 08-11-2004 11:52 PM

Quote:

Originally Posted by 1972C10
Would you swap a step bed for a fleet? Friend of mine has a 93 with a step bed needs tailgate but i imagine he would get one to swap He would prefer a fleetside /

Yes, I would consider a swap. The bed needs to be pretty clean though. I have enough to choose from that we could find one in about the same condition.

99-2door 08-12-2004 01:02 AM

Quote:

Originally Posted by grayw0lf
I'm interested in the Vortec heads for a good price.

$250. complete with valve springs and rocker arms. Plus shipping to AL

1972C10 08-12-2004 01:36 AM

Im gonna talk to him tommmorow If you dont mind Pm me your zip so i can tell him a guestimation as to how far it is from here. His bed is in pretty good paintable shape He may just pay for a bed Ill talk to him tommorow and try to get pics of his bed If he wants to try to swap.

donkey69 08-12-2004 02:17 AM

.....any stock rear bumpers?? :D

my new 72 08-12-2004 03:19 AM

What would you take for the serpentine stuff off of that 98 5.7. All the brackets, the alternator, water pump, etc. Let me know.

ItsNotABlazer 08-12-2004 02:36 PM

Jason is the 96 Vortec where it can be started up or is it already removed? Might be interested in it and the trans. Also anyone interested in any of these parts, I have met Jason before and he is a great person to deal with.

Brad

grayw0lf 08-13-2004 05:07 PM

What's the approx shipping cost on the Vortec Heads to 36067?

99-2door 08-13-2004 07:39 PM

Quote:

Originally Posted by 1972C10
Im gonna talk to him tommmorow If you dont mind Pm me your zip so i can tell him a guestimation as to how far it is from here. His bed is in pretty good paintable shape He may just pay for a bed Ill talk to him tommorow and try to get pics of his bed If he wants to try to swap.

You have a PM :)

99-2door 08-13-2004 07:54 PM

Quote:

Originally Posted by donkey69
.....any stock rear bumpers?? :D

Chrome rear step bumper $125 plus shipping

I have a painted one too that needs a little work.

99-2door 08-13-2004 08:02 PM

Quote:

Originally Posted by my new 72
What would you take for the serpentine stuff off of that 98 5.7. All the brackets, the alternator, water pump, etc. Let me know.

$225 plus shipping (UPS actual) for all brackets, alternator, PS pump, AC compressor. The water pump was seeping, so I am gonna throw it away. Clutch & fan are gone.

99-2door 08-13-2004 08:11 PM

Quote:

Originally Posted by ItsNotABlazer
Jason is the 96 Vortec where it can be started up or is it already removed? Might be interested in it and the trans.
Brad

Brad, I still have all the wiring and cooling hooked up to the 96. The rear-end has been taken out so it can't drive around, but I can start it. The engine runs great. I had planned to use it for the 67 we talked about, just don't have much time to work on it. Decided to concentrate on the vette and get it finished.

99-2door 08-13-2004 09:42 PM

Quote:

Originally Posted by grayw0lf
What's the approx shipping cost on the Vortec Heads to 36067?

The heads weigh about 50 lbs each. UPS shows $46 to Prattville, AL

99-2door 08-13-2004 09:43 PM

ttt
Added some parts and some more $$ and info.

my new 72 08-14-2004 12:58 AM

I'll let you know in a day or two. Thanks for the quick reply.

my new 72 08-14-2004 02:03 PM

My wife went shopping today and spent $300 so I have to pass. No money for the truck this month. Thanks anyway.

donkey69 08-15-2004 11:57 PM

Thanks 99-2door, but got lucky at a local swap meet this weekend and picked up a rear bumper! Thanks again! :bowtie:

apstguy 08-16-2004 06:03 PM

I'm interested in theSway bars - will 4X4 sway bars fit a 2wd?

99-2door 08-17-2004 03:24 AM

Quote:

Originally Posted by apstguy
I'm interested in theSway bars - will 4X4 sway bars fit a 2wd?

I think they are the same, don't know for sure. I can measure diameter if you need me to.

rambler 08-17-2004 11:22 AM

For my 54 chevy project I may be interested in a frame engine/tranny ECM etc.. combo... do you have anything like that? not looking for 4x4,,
Possilby the:
96 Complete 5.7L Vortec Injection and harness, all accesories and 4L80e 100K
$1750

00 5.3L Complete with accesories and harness +ECM 98K $1750

95 -3.42 G80 locking rear diff for 2wd 5 lug drum brakes, complete 10 bolt rare 2wd locker $400

I've heard,, I can "almost" bolt my body on the frame of the newer chevys...

99-2door 08-19-2004 09:22 AM

Quote:

Originally Posted by rambler
For my 54 chevy project I may be interested in a frame engine/tranny ECM etc.. combo... do you have anything like that? not looking for 4x4,,
Possilby the:
96 Complete 5.7L Vortec Injection and harness, all accesories and 4L80e 100K
$1750

00 5.3L Complete with accesories and harness +ECM 98K $1750

95 -3.42 G80 locking rear diff for 2wd 5 lug drum brakes, complete 10 bolt rare 2wd locker $400

I've heard,, I can "almost" bolt my body on the frame of the newer chevys...

I have a frame for ext. cab SWB 88-98 and one for reg cab SWB. Both 2wd. Is that what you are looking for?

hammered94 08-20-2004 05:07 PM

Do you happen to have any grey buckets and door panels from 95-99, I am looking for leather, also i need a tight steering box and a radiator for a 94 5.7 w/28 inch core. thanks


All times are GMT -4. The time now is 07:22 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com