Re: T-Man's 58 Apache project
 

Computer and I have been disagreeing but got it figured out (thanks James) here are some more pictures

Re: T-Man's 58 Apache project
 

A few more

Re: T-Man's 58 Apache project
 

Looking good Don, I am still trying to figure out how that wiper system works? I guess I will just have to come home for a weekend and see for myself. Tyler got a bit done here also, got the bottom of the door cut and the new inner welded in.

Re: T-Man's 58 Apache project
 

Nice to see you working on the truck. looks good.

Re: T-Man's 58 Apache project
 

Hey Tyler I might be coming through your area to do a job north of North Battleford - just southwest of Daysville. I am not sure of what my time line is going to be like as I have a lot of driving to do just to get to the job and then maybe a day or two on the job but if at all possible I really would like to see some of that great work you guys are doing.

I have been getting ready to do some bodywork but it scares the pants off of me. No one around here really to talk to except the one body shop in town and most of the young guys there are doing panel replacement(s) and little actual bodywork. I cant afford to let them do to much work in any case.

Anyway let me know if I can make it work if you are up to a visitor - maybe on my way back south. I won't stay long.

If so I can send you a private message and we can exchange phone numbers or something.

It looks like my road trip will head north from Swift Current all the way to North Battleford and a little beyond. Are you guys close to that highway? Sorry I do not have my Saskatchewan highway map in front of me. At this point I do not know when but am waiting for the call saying they are ready for me - actually could be any day.

56hotrodred (Barry)

Re: T-Man's 58 Apache project
 

I'm glad I can ask you for advice now when I get to this point!!!

Re: T-Man's 58 Apache project
 

Do you have any pictures of you shaving the lip off the firewall? That is a really cool mod. Definetly going to do this to my build.

Re: T-Man's 58 Apache project
 

I did find a few pictures of this mod. We did finally found out the easiest way for me was to weld the inside,then cut the lip off. If I did it again I would make sure the inside was as clean as possible. I do not think much of my welding ,but you wanted to see sohere they are.

Re: T-Man's 58 Apache project
 

a few more

Re: T-Man's 58 Apache project
 

Thanx! those pictures were very helpful and I like the way you showed the back side of your weld. Your welding looks great. Way better than mine. LOL

Re: T-Man's 58 Apache project
 

I have been working on right fender. I think I have all the holes fixed here are some pictures.

Re: T-Man's 58 Apache project
 

DON, YOU ARE THE MACHINE, You are getting more done than I am, I think i need your young energetic spirit. LOL. anyways, looking great, can not wait to get out there in 2 weeks and get a few things done.

Re: T-Man's 58 Apache project
 

Here are a few pictures of what I sandblasted yesterday. Thank-you Uncle Ron for his big unit

Re: T-Man's 58 Apache project
 

James here are a few pictures of the door . Ithink it fits good except for the bottom curve seems to stick out about 1/8 inch,but curve seems good here are some pictures.

Re: T-Man's 58 Apache project
 

Those parts look awesome. The door fit looks as good as any I've seen.

I have decided to change my small soda blaster over to a sand blaster and clean all the remaining small parts I have as well as finish up around some of those hard to get to places in the hood and doors, etc...

I did pm you guys and hope to come by and see your build for real. Still waiting for the call to work but expect it anytime.

56hotrodred (Barry)

Re: T-Man's 58 Apache project
 

WE would be glad to show you what we have been doing. We are usually around as we drive school bus too.

Re: T-Man's 58 Apache project
 

LMAO, me and Luke are shaking our heads at you, LOL!!!!!!!!! Just to set the record straight, We are meaning a Large sandblaster.

Sorry Don had too.

Anyways, that is looking amazing, I hope in a couple weeks when I come home, that we can get that front clip assembled on the truck and see how everything fits, so looking forward to it. Congrats on the job well done so far.

Re: T-Man's 58 Apache project
 

Tyler and I went back to work on truck and got a few more peices sanded for primer.

Re: T-Man's 58 Apache project
 

just read your thread. good job keep it up:metal::canada:

Re: T-Man's 58 Apache project
 

Mel just said that it is looking really great, I wil have to agree with her. Great job guys.

Re: T-Man's 58 Apache project
 

Feel like Johnny Cash one piece at a time.

Re: T-Man's 58 Apache project
 

I know the feeling!

Re: T-Man's 58 Apache project
 

Hey I finally got the word. I am driving up to work north of North Battleford on Tuesday and will probably be there 2 or 3 days. That should put me driving back south on Friday or Saturday. I am driving up on the Alberta side crossing over at Lloydminister and back down through Saskatchewan when work is done. I hate driving back the same way! This will be a long drive - I hope the weather holds.

If I have internet in St. Wahlberg - I think that is were I am going to stay - I will let you know. If not I will try the phone numbers I was pm'd on my way back south and take my chances. If you see a red 4 door Tacoma driving into your yard with Alberta plates don't shoot I am friendly.

56hotrodred (Barry)

Re: T-Man's 58 Apache project
 

56hotrodred Your plans seem to be working out for you. I think if everything works that well here Tyler and James(Nuke1) will be home Friday for weekend. AS far as I can remember have not shot anybody on sight, but I am over 50.hahaha

Re: T-Man's 58 Apache project
 

LOOKING GREAT UNCLE AND TYLER!!!!Im thinking i should of maybe left that old chev there instead of picking it up last summer!!! I imagine your getting rather excited to start on your car!!! Any plans for a motor in the T A yet???