72 Parting out
5 Attachment(s)
1972 running 307 2bbl
Can bring anything you need to Fall Carlisle in 2 weeks. All + Ship front Buckets w/brackets and backs (driver side back has cracks) $550. Rear bench w/nice set of rear seat belts $300 (Chaistan first in line) sold leveling Mats $150 Sold Under Dash Speaker nice shape with all brackets Hardware and wiring $100 Sold double wall top (real nice shape) $200 Hatch $350 Sold NP205 $250 Black Interior door panels. nice Shape. $100 pr full set of door catches. 2dr 2qtr 2 shims $45 Sold Hatch Hardware rubber stops $25 pr latches $25 pr hold down brackets $25 pr Nice set of Black Visors w/catches $100 Sold Let me know what you need. |
Re: 72 Parting out
5 Attachment(s)
more pics
|
Re: 72 Parting out
5 Attachment(s)
more
|
Re: 72 Parting out
3 Attachment(s)
more
|
Re: 72 Parting out
4 Attachment(s)
more pics
|
Re: 72 Parting out
I'll take leveling mats and under dash speaker
|
Re: 72 Parting out
Would you sell a patch panel from the lh quarter to include the b pillar? Also how are the oem floor mats (not the leveling mats). Exhaust manifold bolts/studs, heat stove, and lock rings? Thanks - Pete
|
Re: 72 Parting out
Quote:
|
Re: 72 Parting out
Quote:
Yes PM'D you. |
Re: 72 Parting out
Are you selling Cb? To 37148 please
|
Re: 72 Parting out
would you sell the rear hatch door? what kind of shape is it in?
|
Re: 72 Parting out
WHere in NY are you located? Might be interested in the speaker if it gets to me. Also, did you get a registration with this?
|
Re: 72 Parting out
Does it have a power steering set-up?
|
Re: 72 Parting out
ill take the hatch pending pic and shipping cost
|
Re: 72 Parting out
how are the front seat belts
|
Re: 72 Parting out
I'll take the door catches/alignment pieces.
|
Re: 72 Parting out
2nd on leveling mats please.
|
Re: 72 Parting out
I'm interested in the heater control. Can you post closer photo of face and confirm that controls and face are solidly attached, please.
|
Re: 72 Parting out
I'm looking for a parking brake cable spring when you get underneath it next time. It is the one that connects from the end of the front cable adjustment to the cross-member under the tub. I can supply a picture if needed. I know this is a very small piece. Just hard to find and I lost mine.
|
Re: 72 Parting out
Are you willing to remove and sell the reinforcement cross member for the bucket seats? The one that is about 3 feet long that the front bolts of the seat fasten to?
|
Re: 72 Parting out
Also interested in the inspection/dust cover for the auto tranny if there and in good shape (w attachment bolts) and the red pos wire harness for the radio. Thanks again.
Any chance the gears are 3.73? Pete |
Re: 72 Parting out
looking for the little clip that goes on the wiper motor under the cowl.
|
Re: 72 Parting out
5 Attachment(s)
more pics
|
Re: 72 Parting out
5 Attachment(s)
more
|
Re: 72 Parting out
5 Attachment(s)
more
|
All times are GMT -4. The time now is 02:03 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com