|
Project "Colonel"
2 Attachment(s)
--------------------------------------------------------------------------------
Hello all, new to this site and this is my first post. I'm wanting to start a build thread. So here we go. Everyone meet Colonel. Its a 78 Chevy Scottsdale 4x4. It has a 350 engine with Turbo 350 Tranny, 3.73 gears in the 12 bolt rear end. Unsure of the front axle or gears yet. I brought it home May 18th after inheriting it from my father. (My fathers nickname was Colonel so that's where the name come from!) The pic included is it on the trailer the day I brought it home. More to come as I go along |
Re: Project "Colonel"
1 Attachment(s)
Heres the block I'm going to use for my 383 stroker build.
|
Re: Project "Colonel"
2 Attachment(s)
Here is the pics of when I pulled the rear diff cover off to find out what gears it has
|
Re: Project "Colonel"
Quote:
|
Re: Project "Colonel"
I picked up some parts today! Holly renew kit for the Holley 670 Truck Avenger carb I'm guna run, a clear fuel filter for the same, and the fluid to finish the rear diff cover change! More pics to come
|
Re: Project "Colonel"
Looking good! I'll follow along..
|
Re: Project "Colonel"
Quote:
|
Re: Project "Colonel"
Yep he told me about it!!
|
Re: Project "Colonel"
3 Attachment(s)
Here are the headers and carb I will be using. Once I make sure the headers fit, I will have them powdercoated. The other pics are just random pics taken the other day
|
Re: Project "Colonel"
Quote:
|
Re: Project "Colonel"
I like the truck, I'll be following this one!
|
Re: Project "Colonel"
I got some parts for the stroker build today. I got the heads and the engine bolt set. I'll post pics in a lil while:metal:
|
Re: Project "Colonel"
2 Attachment(s)
Here are the packages I received yesterday 6-16-14.
|
Re: Project "Colonel"
5 Attachment(s)
And here are all the stuff I received today:metal:
Alum Air Filter Valve covers Comp Cams Cam and lifter set Timing chain Push rods ARP main bolt set Comp Cams break in additive 1.5 Self Aligning Roller Rockers Rough Country Front ext brake lines |
Re: Project "Colonel"
I received a call from the company I ordered my rotating assembly from, they shipped it out today.
|
Re: Project "Colonel"
Questions, comments, snid remarks. any and all comments welcome
|
Re: Project "Colonel"
1 Attachment(s)
I received my Edelbrock Intake and Carter Electric fuel pump today.
|
Re: Project "Colonel"
5 Attachment(s)
New parts came in over the weekend!
Pictures 1. Pro Street Harmonic Balancer 2. King Main and Rod Bearing, Hastings Moly Rings, Melling Oil Pump w/ext pick up. 3. Scat Stroker Crank 4. Dist w/ coil 5. Accel 8.8 plug wires |
Re: Project "Colonel"
4 Attachment(s)
6. Scat Flexplate
7. 7qt Zinc Oil Pan 8. Probe .060 Pistons and Scat rods w/ ARP bolts 9. Alum Timing Cover |
Re: Project "Colonel"
Looks like you got quite the parts pile! I can't wait to start playing around with my 454
|
Re: Project "Colonel"
The fun hasn't even started yet! I'm going to try and take the front end off this weekend.
|
Re: Project "Colonel"
5 Attachment(s)
I got the front end off the truck, and got the 305 that was in it out. I also used my new toy, an electric power washer, to clean all the grease and dirt from the frame and engine.
|
Re: Project "Colonel"
Sweet! One step at a time!
|
Re: Project "Colonel"
4 Attachment(s)
more pics
|
Re: Project "Colonel"
1 Attachment(s)
Gasket Set
|
| All times are GMT -4. The time now is 09:56 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com