Help ID These Brackets
1 Attachment(s)
Got these recently in a box of parts I purchased for a couple other things I wanted. Digging thru the box to the bottom I found these. Solid steel rod with both the straight and the 90 degree bend being threaded for a coarse thread body bolt (?). Measured them to be 12 1/4'' in length and the rod looks to be 5/16'' in diameter. Similar to the rear fender support rods on my 71 4x4 but too short for length. Square body rear support rods maybe, not sure as don't have a square body here? Tried a search and probably did not put in the right wording. Any thoughts and ideas would be a help.
|
Re: Help ID These Brackets
You might be right about them being for a square body
https://classicparts.com/1973-91-bed...e-fleetside-pr |
Re: Help ID These Brackets
Patrick, those look to be the same with perhaps being an after market brace from Classic Parts the threaded portion of the brace looks like a welded on nut plate. These rods appear to be formed as one piece and then threaded. Thanks for the assist.
|
All times are GMT -4. The time now is 02:04 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com