The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Linkage for Holley 4160 on ‘68 327? (https://67-72chevytrucks.com/vboard/showthread.php?t=766913)

Jeepnut

07-05-2018 08:15 PM

Linkage for Holley 4160 on ‘68 327?

Just installed a Holley 4160 on my 327 (cast iron square bore manifold) and trying to make the linkage work. The linkage is the original, which is a rod with a stud at the carb and a threaded joint back at the pedal linkage. Looking for ideas to make this set-up work...or perhaps change to a ball/socket type of connection at the carb. Is there anything over the counter that will work? Or do I have to fab?

Thanks!

geezer#99

07-05-2018 08:34 PM

Re: Linkage for Holley 4160 on ‘68 327?

Try one of these.
https://www.holley.com/products/fuel...age/parts/20-7

Jeepnut

07-06-2018 11:47 AM

Re: Linkage for Holley 4160 on ‘68 327?

Thanks...that’s what I had in mind...price is right too. either that or changing to a ball/socket set up.

mike16

07-09-2018 01:41 AM

Re: Linkage for Holley 4160 on ‘68 327?

take a look at corvette vendors

All times are GMT -4. The time now is 02:46 PM.