The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   core support repair (https://67-72chevytrucks.com/vboard/showthread.php?t=824034)

64k10burb 07-21-2021 08:24 PM

core support repair
 
1 Attachment(s)
Hi guys, I just picked up a '69 c-10 P/U.

most of the passenger side core support mount holes (for inner fender) are gone.

Can I make a pattern from the drivers side and flip it?

I'm not sure if they are the same on both sides.

Thanks in advance.

cornerstone 07-22-2021 04:33 PM

Re: core support repair
 
Hey Brian, The core support on my 72 is nearly identical on both sides, so as long as your not intending to win any shows, that'd be a good way to shape your metal to weld in a repair.

You would probably get more responses if you posted in the general area of the forum instead of the builds section.

64k10burb 07-22-2021 05:33 PM

Re: core support repair
 
Quote:

Originally Posted by cornerstone (Post 8948431)
Hey Brian, The core support on my 72 is nearly identical on both sides, so as long as your not intending to win any shows, that'd be a good way to shape your metal to weld in a repair.

You would probably get more responses if you posted in the general area of the forum instead of the builds section.

Thank you!

I did post it there, I can't figure out how to delete this one.


All times are GMT -4. The time now is 10:15 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com