The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   MN Parting 83 C20 (https://67-72chevytrucks.com/vboard/showthread.php?t=416284)

tkeduk8r 08-12-2010 05:46 PM

Parting 83 C20
 
5 Attachment(s)
Here are a few pics... Engine and trans are allready spoken for... it has 84K on it, and all other info ill let the build sheet explain. The front clip is very nice for MN and the grill looks to be mint. Interior is rough, but i do have enough spare parts around here to make the door panels complete. Radio works well and does have the four speakers. I can take additional pics of things if needed. Ill try to respond to each person in order.... here are the pics...

--Mike

tkeduk8r 08-12-2010 05:48 PM

Re: Parting 83 C20
 
4 Attachment(s)
Some more....

USSkoval 08-12-2010 08:48 PM

Re: Parting 83 C20
 
Where did you find the build sheet?

spudz 08-12-2010 11:14 PM

Re: Parting 83 C20
 
how much for the complete door panels with window cranks shipped to 29477 sc?

tkeduk8r 08-13-2010 12:20 AM

Re: Parting 83 C20
 
Andy.... Build sheet was in the glove box believe it or not.... usually its under the seat, behind the seat, or under the carpet (in my experience)...

Spudz... sent you a PM...

--Mike

dabels23 08-13-2010 08:14 AM

Re: Parting 83 C20
 
Hows the dash pad look what price shipped 39090

Willey-68 08-13-2010 09:13 AM

Re: Parting 83 C20
 
can you give me prices & shipping & Condition for these items 1- left door mirror 2-upper grill molding 3-Radio 4-left headlight bezel .thanks Richard 72529

tkeduk8r 08-13-2010 10:17 AM

Re: Parting 83 C20
 
dabels... dashpad is pretty cracked, I would find a better one....

Richard Ill get out to the truck later today for the upper molding, bezels, and mirror... Radio is very nice though and works well.... Shipping shouldnt be too bad on all the items, EXCEPT the upper grill moulding due to its ackward size....

--Mike

tkeduk8r 08-13-2010 01:34 PM

Re: Parting 83 C20
 
door panels SOLD!!!! Thanks Cole!!!

tkeduk8r 08-13-2010 01:48 PM

Re: Parting 83 C20
 
4 Attachment(s)
Richard,
Heres the pics of the bezels and grill surround. The upper molding is mint, as well as the headlight bezels... i did not see any flaws... Drivers mirror has a crack, but I think i have a good one, ill check. Ill shoot prices once i check out the mirror...
--Mike

spudz 08-13-2010 02:30 PM

Re: Parting 83 C20
 
Quote:

Originally Posted by tkeduk8r (Post 4137204)
door panels sold!!!! Thanks cole!!!

thank you!

STOCKISH 08-13-2010 04:26 PM

Re: Parting 83 C20
 
Interested in radio if it gets to me. Price please shipped to 27587

tkeduk8r 08-14-2010 12:47 AM

Re: Parting 83 C20
 
1972... you bet.... I do have probably one too many radios around here so I more than likely have another one of equal condition.... Ill take some pics an dget them up for you...
--Mike

GmtGmt 08-14-2010 07:50 AM

Re: Parting 83 C20
 
dose this truck have hydro boost?

tkeduk8r 08-14-2010 10:48 AM

Re: Parting 83 C20
 
Gmt... no hydroboost, wish it did!!!.....
--Mike

427mike 08-16-2010 03:01 PM

Re: Parting 83 C20
 
Need shift linkage from the steering colun to the transmission, inlcuding the bracket that bolts onto the frame. Also would like the steering column bracket that bolts to the firewall just below the brake booster - holds the steering column (has two bolts with a clamp). Thanks Mike

fmar9 08-16-2010 07:28 PM

Re: Parting 83 C20
 
How much for the drip rails shipped to 24401? Thanks

Silence86 08-16-2010 11:57 PM

Re: Parting 83 C20
 
need price on passenger grille trim and passenger side marker shipped to 76180

tkeduk8r 08-17-2010 11:17 AM

Re: Parting 83 C20
 
2 Attachment(s)
allright here goes... had to spend time with a close family freind with brain cancer this weekend (were gonna lose another die hard car guy:whine:), but ill try to get caught up best I can....

Willey-68 is up first on radio and front grill parts and radio. (ill call you again this afternoon)

72 SuperCheyenne... I have a few more pics of some other radios attached... I have bench tested them and they both work ok... $60 shipped for the digital display, $50 shipped for the analog display...I can take more pics of either of those.... Ill also throw in the correct mounting bracket for th erear of the radio....PM me if interested and details....

427Mike.... linkage is still needed by me for my conversion... column bracket $15 shipped. pm me if interested and details...

fmar... drip rails are $45 shipped, akward size... also there is some scuffing on drivers side moulding, but would easliy file and buff out nice....pm me if interested and details...

Silence86... Willey is first up on grill trim... if he passes its yours... marker light is $15 shipped.... pm me if interested and details...

Lemme know....
--Mike

RandyP 08-17-2010 11:49 AM

Re: Parting 83 C20
 
If no one else wants the radio with digital display, I'm interested in it tkeduk8r.

tkeduk8r 08-17-2010 12:02 PM

Re: Parting 83 C20
 
Randy... sent you a PM

RandyP 08-17-2010 12:15 PM

Re: Parting 83 C20
 
Replied, and thanks!

tkeduk8r 08-17-2010 12:19 PM

Re: Parting 83 C20
 
dig radio SOLD!!! thanks Randy!!!
--Mike

trenchwarfare 08-17-2010 04:10 PM

Re: Parting 83 C20
 
How about the speedometer or maybe the whole cluster. Is it the electronic setup? I'm not too sure if it will work on my '90 Suburban.

tkeduk8r 08-17-2010 04:21 PM

Re: Parting 83 C20
 
No your suburban has an electronic speedometer. 87-91 used those. 73-86 used a cable drive speedometer... I may have a 87-91 in my boxes... Ill look and get back to you...
--Mike


All times are GMT -4. The time now is 04:48 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com