"One really slow build" thread
His guys,
This is my 67 LWB, that I am currently trying to get on the road (soon to be a daily work-horse) I am on the tail end of installing a freshly rebuilt 350 & a good used 400 trans So far the only customization is we have extensively modded a 84 Chevy tilt column to fit The future holds air-ride suspension & a whole lot a other stuff I haven't thought of yet Today I started to install a 98 Chevy rear bench seat (came out of my dads 98 4 door), so I thought I'd share pics (it's so nice having a seat that flips forward) One thing I don't like about it is that it's too tall IMO, but the stock one was about the same (some day I'll chop the mounts down) The front holes lined up really close (just had to pry a little to get one of the bolts in), now I need to drill new rear holes & weld a nut to a big washer or piece of metal then weld that to the bottom of my cab that way it's like factory http://i81.photobucket.com/albums/j2...7_02170009.jpg http://i81.photobucket.com/albums/j2...7_02170013.jpg http://i81.photobucket.com/albums/j2...7_02170015.jpg |
Re: "One really slow build" thread
Today I also started building a new cross-member for the trans, so it won't be such a butt to run my exhaust
I built this one in hopes that I would have enough clearance, but may have to build one out of tubing so that I can bend it to have even more clearance I used a piece of C-channel I had laying around & a little angle, all thats left is to drill holes & paint it http://i81.photobucket.com/albums/j2...7_02170019.jpg http://i81.photobucket.com/albums/j2...7_02170021.jpg |
Re: "One really slow build" thread
the seat fits nice, and that cm will deffenitly be strong..haha
|
Re: "One really slow build" thread
Yeah, I tend to over build a little :lol:
|
Re: "One really slow build" thread
looks good. This seat are great for these trucks. Really slow build sounds like my truck project too. Nice work on that cross member!
|
Re: "One really slow build" thread
Yeah, I might could get some stuff done if I would just clean the shop :crazy:
I'll prolly clean it a little today It's a 35 X 60 and you couldn't even walk in it the other day till I cleaned it up some :lol: Has anybody ran the Cherry Bomb Extreme mufflers ???????? |
Re: "One really slow build" thread
I also changed out my steering-wheel yesterday, just gotta get the horn working :cool:
http://i81.photobucket.com/albums/j2...7_02170017.jpg Sorry for the crappy pic :lol: |
Re: "One really slow build" thread
That '98 seat is about as good as it gets for those trucks - very comfortable and look nice, but a little hard to find.
|
Re: "One really slow build" thread
Lucky for me, my dad does construction and removed his rear seat so he could haul more tools
I was gonna put it in my 54 ford, but that project is on long term hold :crazy: It was really nasty from sitting outside in the 54, so it took awhile to clean Here's my buddy Scott, we did our own "Simple Green" commercial :lol: http://i81.photobucket.com/albums/j2...7_02160001.jpg http://i81.photobucket.com/albums/j2...7_02160003.jpg http://i81.photobucket.com/albums/j2...7_02160004.jpg It's Clean !!! http://i81.photobucket.com/albums/j2...7_02160011.jpg We had already cleaned the back before I thought to get pics :crazy: but the pics don't really show how nasty it realy was :barf: |
Re: "One really slow build" thread
I see the seat but where are the pics of the Truck???
PICS PICS PICS PICS PICS PICS PICS PICS PICS PICS PICS PICS PICS Then again maybe I don't know how to get the Truck pics off the puter? :crazy: |
Re: "One really slow build" thread
So Sorry !!!!!!!!!!!!!
The funny thing is, that for all the pics I have I only one pic of the whole truck http://i81.photobucket.com/albums/j2...7_01040006.jpg http://i81.photobucket.com/albums/j2...7_02150016.jpg http://i81.photobucket.com/albums/j2...7_02150017.jpg I'll try to get some more pics soon :cool: |
Re: "One really slow build" thread
|
Re: "One really slow build" thread
Ok, got some pics today
Although I didn't do anything :crazy: http://i81.photobucket.com/albums/j2...7_02180003.jpg http://i81.photobucket.com/albums/j2...7_02180004.jpg http://i81.photobucket.com/albums/j2...7_02180008.jpg http://i81.photobucket.com/albums/j2...7_02180009.jpg |
Re: "One really slow build" thread
yeah you did. It's called surveying and planning! lol. Nice!
|
Re: "One really slow build" thread
I didn't have much time at the shop today, but I'm almost ready to put in my X-member I built
I got the old one pulled out & the holes drilled in my new one, now I need to test fit it and drill the holes in the frame then paint it and put it in for good I didn't have time to get pics, but should tomorrow |
Re: "One really slow build" thread
Well here is an update :crazy:
I didn't get out to the shop till late (again), but I did get some stuff done :metal: I wanted to convert my truck to cable throttle instead of the old linkage stuff At first I was just gonna buy one of Jegs throttle plate thingys (till I found out that they're $80 bucks :crazy: ) so today I decided to make one :metal: I took a sheet of steel sheet that I had lay'n around & took the throttle mount thingy from a 73 parts truck that has a BOP engine in it Anywho you get the picture, So now I have to figure out how to convert it to swing-pedal :barf: I have to get a new trans mount, then I can finish my custom X-member http://i81.photobucket.com/albums/j2...7_02200005.jpg http://i81.photobucket.com/albums/j2...7_02200007.jpg http://i81.photobucket.com/albums/j2...7_02200010.jpg http://i81.photobucket.com/albums/j2...7_02200013.jpg |
Re: "One really slow build" thread
|
Re: "One really slow build" thread
|
Re: "One really slow build" thread
http://i81.photobucket.com/albums/j2...7_02200031.jpg
http://i81.photobucket.com/albums/j2...7_02200032.jpg http://i81.photobucket.com/albums/j2...7_02200033.jpg http://i81.photobucket.com/albums/j2...7_02200034.jpg http://i81.photobucket.com/albums/j2...7_02200036.jpg I didn't get to bolt it down because I need to trim one of the edges a little :whine: Next project is to install the rear bumper, but first I have to relocate the big A gas tank :crazy: http://i81.photobucket.com/albums/j2...7_02200040.jpg http://i81.photobucket.com/albums/j2...7_02200041.jpg http://i81.photobucket.com/albums/j2...7_02200042.jpg |
Re: "One really slow build" thread
|
Re: "One really slow build" thread
Sorry but uh I only get the red X's. :(
|
Re: "One really slow build" thread
Hmm, thats weird I've never had anybody have a problem with my pics
Here is a link the the PhotoBucket page they're on http://s81.photobucket.com/albums/j223/903262/Bad%2067/ |
Re: "One really slow build" thread
Ok, made a little more progress today :metal:
I got my trans X-member almost bolted in (gotta drill holes in the frame) woulda had it in but some of the PO's (previous owners) drilled / torched a bunch of holes in the area I need to drill :crazy: So I plan to weld these holes up so that it's not so week :cool: I also got my throttle plate finished (just had to trim the edge & bolt it on) :blah: On with the pics Old P.O.S. X-member http://i81.photobucket.com/albums/j2...7_02210009.jpg http://i81.photobucket.com/albums/j2...7_02210010.jpg New Sano X-member http://i81.photobucket.com/albums/j2...7_02210007.jpg http://i81.photobucket.com/albums/j2...7_02210005.jpg |
Re: "One really slow build" thread
I also started my swing pedal conversion, but ran into a snag, the trans I'm running is a 400 so it has kick-down switch
Well the swing setup I'm using is off of an early square-body & has the switch mounted to the plate that holds the pedal on & when you bend the pedal arm over so that it'll align with the cable it hits the switch So I bent the switch bracket over, & it worked (so I thought) but when I got it over to the truck I realized that it wouldn't work because the pedal arm wasn't even close to the switch So I will have to either build a new switch bracket, pedal rod, or both :whine: Oh yeah, I also had to cut the top off of the bracket http://i81.photobucket.com/albums/j2...7_02210012.jpg http://i81.photobucket.com/albums/j2...7_02210013.jpg |
Re: "One really slow build" thread
Has anybody else done the conversion, with the switch for the 400
Also, what do you do for where the cable comes through the fire-wall (it has a square hole & I don't have a drill-bit that does those) I was just thinking about taking a hole-saw to my parts truck & cutting out the square hole ? |
All times are GMT -4. The time now is 03:15 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com