Z06 Corvette Exhaust Manifolds
 

I've got 2 sets of exhaust manifolds. Also have a 5.3 oil pan & pickup tube, and a new lower rad. hose that are from a 2000 truck.

Open to offers, prices are plus shipping.

2008 Z06 LS7 Corvette exhaust manifolds (I believe technically they are headers) $150

2000 5.3 truck exhaust manifolds $50

2000 5.3 oil pan & pickup tube $50

2000 5.3 lower radiator hose $10

I can get pictures upon request

Re: Z06 Corvette Exhaust Manifolds
 

Are the z 06 manifolds symmetrical?

Re: Z06 Corvette Exhaust Manifolds
 

Yes they are, exit location is exactly in the middle.

Re: Z06 Corvette Exhaust Manifolds
 

Can I get photos of the zo6 manifolds

Re: Z06 Corvette Exhaust Manifolds
 

Pictures of the Z06 manifolds...

Re: Z06 Corvette Exhaust Manifolds
 

work in a 67 c10?

Re: Z06 Corvette Exhaust Manifolds
 

That would depend on your motor mount setup.

Re: Z06 Corvette Exhaust Manifolds
 

If you use a motor mount setup like this, that uses adapter plates to put the motor mounts in the stock SBC location, then these manifolds would work.

Re: Z06 Corvette Exhaust Manifolds
 

One thing to think about is clearance around the heads, @ the firewall....that engine is set in 1" forward from the I 6 position. However, the firewall was clearanced for a BB Olds that was run in the mid 90's (it fits pretty tight at the rear). To move the engine forward much at all , may cause problems on the bottom for clearance on the pipes/cats ? Longhorn

Re: Z06 Corvette Exhaust Manifolds
 

do you have the short collecter and bung for O2 sensor ?

Re: Z06 Corvette Exhaust Manifolds
 

No I don't have any collectors for them, just the manifolds.