brakes need HELP??????
 

I done the power brake conversion and the
brake pedal is to low, can I adjust it out or what do I do.

------------------
71 c-10 307/3 spd in the process of a makeover

OOPS!!!!!!!!!!!!!!!!!!!!!!!!!!!!

------------------
My CANADA includes BEAVER!!!!!!!
[img]http://communities.msn.com/_Secure/0NwAzABASh!uohRSfISjhQyAQFlB*NewhOUaHR6bv*u3evbZdsgR9IvkX4X4GCQKh*KzIWBO9**DLq1ZpIJppCQ/Chevy_anim(1).gif[/img] http://www.flags.com/dreamimages/Flags/canada.gif 71 Custom/10 lb fleet .040 over 350/


burlinator2000@hotmail.com
Richmond,B.C.

[This message has been edited by Burlinator (edited March 19, 2002).]

[This message has been edited by Burlinator (edited March 21, 2002).]

does it sit too low at rest before you depress it, or ?

return spring unhooked under dash ?
or is it a master cylinder problem, IE air in the lines, need ot bleed brake system out ?


need details from ya

------------------
-71/C-10(thx teeitup and crews!)350 4+4/CH465(thx 71Chev, GMCPaul, and CPNE)longfleet bed(thnx meathead95)!still building it-
-'84 Z28(Z28) 1G1AP87GXEL100000 with H.O. 305/4bbl/190net/hp(L69) 3.73 rear(GT4/YC4) 700R4(MD8-MXO) & other goodies :)
-79 G20 pass van, 350/th350/10bolt,
paint is overrated
Randy- Lincoln, IL
randy@ccaonline.com
© RSS Enterprises 2000

the pedal sits too low at rest. i had to adjust the brake light switch all the way out for the lights to even go out. but the pedal sits abut 2inches lower with the power brakes than it did with the manual brakes. they work fine i had to do some experimenting with the set-up,i didn't have any money to buy a new master cylinderso i used the one that was on the truck and it worked fine the padel thing still bothers me though,i didn't look at the pedal in the donor truck before i took it out. i need some reassurance,maybe this happens with all of them

------------------
71 c-10 307/3 spd in the process of a makeover

ttt

Ok, I am a little confused here. Supposidly this guy screwed someone on a deal, hasn't answered the alligations that he did screw someone, and you guys are giving him advise?!?!?!?!?! http://67-72chevytrucks.com/board/ub...ML/020137.html

------------------
Check out other members trucks

1968 50th Anniversary C-10 Suburban (Tows all these cars all over the place)
1968 50th Anniversary C-10 Pickup
1968 50th Anniversary C-20 Pickup CST
1969 SS Camaro Conv't
2000 Chevy Malibu (Suppose to be daily driver, but the Burb is)

Phoenix, AZ.

Click Here for Parts and Venicles I have Available

THINGS I AM LOOKING FOR:
67-68 SUBURBAN TRIM. $$$$ Reward
for finding the 3rd door trim piece
and the small piece that goes on
the 1/4 panel right behind the
3rd door.

No, not giving advice! .... just thought it'd be easier for the administrator to delete all of his posts if they were all at the top! LOL

------------------
Formerly know as: "GMC Under Construction" Current project: 1967 GMC shortbed/fleetside, 350/700R4, air bag suspension. Other vehicle of interest: 1957 Chevy Bel-Air 4dr hard top, 283/powerglide, lowered 3-1/2" in front and 2 inches in the rear.

Web Site: jaySpot.com AOL Screen Name: Slammed67GMC Location: Kansas City, MO

Whasamatta timmy? Cat got yer tounge, or are you just feelin' guilty?

Ya gunna talk TIMMY! We are all waiting! Let's hear your side of the story. Are you not even going to defend yourself? Must be guilty!!

ttt
Take care of other stuff first!