parting 72 blazer
 

luvs old one if you need something pm me and ill see if i got it i personally think the windshield frame is good and the rest of the tub is sh!t, the frame is sh!t also, it has some good things though it is totally stripped now i also have the stock leafspirngs and new front shocks and new driveshafts off of it f/s
thanks
keith

looking for hatch handle parts. mainly thehandle and the oval piece that slides over the handle shaft

sorry no hatch but i do have a really nice double wall top for sale

it does appear to have a 2" lift which is for sale springs in front and blocks in back

does it have the brackets for the rear cargo panels?

Yes It Does, But I Think Keith Was Going To Keep Those. ;)

How about the shifter knob on the transfer case?

Got it?

Thanks!

yeah i am keeping the cargo panel brackets. it even had the chrome trim for them :-)

the transfer case is not correct so the knob isnt either it looks like something from like an 88ish to a 94 or so to me

Meathead95, You have a PM.

:)

how much for the window frame for blazer

armando low you are 3rd in line for it ill let you know

Anything left of the floor pans?

what are you looking for

Sent PM
 

Sent PM

how about the title/vin plate(s)?

Floorpans
 

Drivers side, humped up area where seat bolts in. Mine's a little too far gone to get with patch panels alone. See pic below, hopefully that'll explain it better than I can.

http://www.imagestation.com/picture/...a/f76d75dd.jpg

yeah ive got a good hump where the front of the seat bolts to do you need both sides?

Pans
 

Passenger side is a lot better than drivers.

I don't know what shape the rest of your pans are, but mine are basically shot from the seat back on the drivers side. Whatever you have I am interested in.

Shoot me a PM

Thanks,

Kurt

i bought the whole front section out of a blazer from another member all i have left is the hump where the front seats go to you asked about and about the front half of where the console sits and the perimeter of the bolt in hump. the floors that where in lluvs blazer where totally crap.

Yup
 

Hey, that's exactly what I need. What are you looking at for a price?

Thanks,

Kurt

how much of it do you need?

How much
 

Keith,

I got home this afternoon and took a look. I'd like to get both sides, each side including the captured nuts for the seats. I can build a jig that way to make sure I can get the seats located properly.

Passenger side, while better than drivers, is still showing some severe rusting. Truck was in the Nags Head area for 5 years and the salt got to the floor pans. I don't think there will be a lot left after blasting.

Center section by the console is good, I won't need that piece.

So, if you are willing to part with both the humped up areas, that would be great. If there's good metal beyond the humped area, I guess if you could cut about an inch beyond where you'd think the tangent point was on either side, front and back of the hump. That should give me enough to work with.

Let me know a price and an estimate for shipping and I can get you some money.

Thanks,

Kurt

leaving for illinois as we speak ill be back monday and will take care of it then. email me your address so i can respond with a pic of what i have my email is meathead95@hotmail.com please include your address also so i can get a shipping quote
later
keith

Front seat belts, stereing gear box, sterring colum handles and levers, parking brake hardware, both side window regulators ?

kw-sent you pics

team harvey-window regulators where junk, seat belts where crap, i kept the steering box, handles and levers are in the junk yard, all the parking brake stuff was gone.