Disc brake swap
Ok I have a donor 81 chev 1/2 ton truck. to swap to a 69 I take everything off the front of the 80 and put on the 69? upperand lower a frames, drag links cross member and all. Right? Someone said something about drilling new holes for something? where? Thanks
|
Bulldog, I did a disc brake swap on a 68 about a year ago.The parts truck was a 79. I left the stock A-arms and put 79 ball joints on them.(the studs are longer on the newer ball joints because the spindles are thicker)
Then I used the spindles,tie rod ends,and center link from the 79. I didn't have to change the pitman arm or the idler arm. Hope this helps. ------------------ 70 Chevy C/20 72 GMC 1500-SWB 72 GMC K/2500 |
All times are GMT -4. The time now is 08:26 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com