1/2T vs. 3/4T 2wd front spindles and hubs.
Hey guys,
Does anybody know if 3/4T 8 lug hubs will fit on 1/2T spindles? I am putting a 8 lug Dana 60 in the rear of my C-10 and I want to make the front 8 lug also. Thanks for any info. AndyT |
Re: 1/2T vs. 3/4T 2wd front spindles and hubs.
Does any body have a idea on this?
Thanks for the help. AndyT |
Re: 1/2T vs. 3/4T 2wd front spindles and hubs.
You will need to replace the lower a arms(due to ball joint size), upper/lower balljoints,add the 3/4 ton spindles, & all the steering linkage(tierod ends/sleeves,& the centerlink). the 3/4 ton ball joints will bolt into the upper arms. best of luck,:crazy: L
|
Re: 1/2T vs. 3/4T 2wd front spindles and hubs.
One more question. Well the same caliper work or do I need 3/4T calipers?
Thanks AndyT |
All times are GMT -4. The time now is 12:30 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com