pedal to Z bar clutch pushrod Q
 

ok on V8 2wd 4 speed models, is the pedal to Z bar clutch pushrod through the firewall supposed to be straight round rod or bent/curved at one end, at the Z bar end ? there are two versions of them out there, need ot know which is for which for sure,. cant remember now.. the curved end ones are a gray color metal and the straight rod ones are darker steel,,.

thanks for anything

------------------
Randy- Lincoln, IL
randy@ccaonline.com 2177353230
*many GM parts bought, traded, or sold -am parting out: '81 Cutlass Supreme Brougham

current fleet: -71 C-10 350/CH465/3.07- basketcase, #1
-90 Cavalier 2.2L sky blue, a driver
-84 Z28 5.0L/700R4/3.73 daily driver
-84 Firebird/SE 2.8L/T-5/3.73/engine bad, project #2
-82 purple Trans Am, project #3
*Paint is overrated*
© RSS Enterprises 2000

When I converted back to stick, I had to bend that rod for some reason....

------------------


http://hometown.aol.com/racedvl/racedvl69index.html

Woodstock,IL.northwest of Chicago

It's not what you buy, it's what you build!!

I did not climb to the top of the food chain, to become a vegetarian.

For some pics of my truck.

the straight rod should be the 6cyl rod.....the V8 setup that I have is curved.......69longhorn.

thats what i thought,. thanks!

------------------
Randy- Lincoln, IL
randy@ccaonline.com 2177353230
*many GM parts bought, traded, or sold -am parting out: '81 Cutlass Supreme Brougham

current fleet: -71 C-10 350/CH465/3.07- basketcase, #1
-90 Cavalier 2.2L sky blue, a driver
-84 Z28 5.0L/700R4/3.73 daily driver
-84 Firebird/SE 2.8L/T-5/3.73/engine bad, project #2
-82 purple Trans Am, project #3
*Paint is overrated*
© RSS Enterprises 2000