WTB GM vortec intake bolts
Want to buy a set of 8 GM Vortec Intake bolts..SBC
Let me know what u got. |
Re: WTB GM vortec intake bolts
I don't have any, but just got done putting a hybrid TBI intake onto a Vortec motor. FYI, there is nothing special about the bolts, unless you are going for the "stock" look. They are 5/16" diameter. I forget the length, but it seems they are about 1 1/2" long. I pulled the stock bolts out and used longer bolts to attach the engine to the lift when i put the engine in. A hardware store should have them, or GM parts. I could imagine that GM will be high $$$ though.
|
Re: WTB GM vortec intake bolts
yes.. you are "right on the money"
in more ways than one.... the bolts are plain... i ordered some from GM... the counter guy let me see them...didnt buy them. i got some from my NAPA store.. GM lists for $5.00 and some change for each.. EACH bolt... grrrrr. thank you for your input. |
Re: WTB GM vortec intake bolts
They come with sealant applied to the threads dont they? Also dont for get the 11 lb/ft torque spec.
New GM gaskets(ones with the metal anti crush tabs) or the FelPro problem solver gaskets are the way to go. Goodluck peace Hog |
Re: WTB GM vortec intake bolts
Hog, yes, thank you.. good info
|
Re: WTB GM vortec intake bolts
Just order the ARP ones. Better quality and cheaper then GM. Check at your local speed shop for p/n 134-2002 for the factory look ones. 12 point and stainless are also available
And yes, use the Fel Pro Problem Solver p/n MS-98000T gaskets. They will save you a real issue down the road. |
All times are GMT -4. The time now is 07:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com