my truck build!!
 

Alright I thought I might as well start a build thread since I might actually start doing some work again. Quick history on my truck 1969 fleetside longbed custom/10. Basic 350/th400 combo with a open 3.08 in the rear. found my beat up green truck in stonyford california. Was my aunt's truck for a long time and was also my great uncles till he passed away. He was pretty mechanically skilled but he did some weired stuff. Reinforcing things with chicken wire that didn't need it. funky wiring and an A/C power socket that gives off unregulated DC from the alternator at a flick of a switch :lol:. Anyways probably should add some pictures.Brought home my truck about a year and a couple months ago so this is just like a quick montage of what ive done and where i am now.
some pictures when i first found it
http://i203.photobucket.com/albums/a...3/EPSON007.jpg
http://i203.photobucket.com/albums/a...3/EPSON008.jpg
http://i203.photobucket.com/albums/a...3/EPSON006.jpg
http://i203.photobucket.com/albums/a...3/100_1644.jpg
http://i203.photobucket.com/albums/a...3/100_1646.jpg
http://i203.photobucket.com/albums/a...3/100_1642.jpg

Re: my truck build!!
 

made sure and keep the registration up to date or put a non op on it so you can keep the old blk and yellow plates. Other wise the DMV might take them from you when you re-register it.

Re: my truck build!!
 

So I found it Popped in a new battery then got it ready to go but then we realized we had a starter that was totally burned up. So we had to drive home which was 5 hours away and come back next weekend with a new starter that didn't fit. So me and my dad pulled the guts out of the new one and put it in the old one and off we went! It was a slow 50mph drive home I was surprised it got us home It had a water leak (freeze plug) and later we found out the U-joint were practically turned into dust. anyways we got it home and started to figure what needed to be done. we changed the U-joint first
http://i203.photobucket.com/albums/a...3/100_1730.jpg
http://i203.photobucket.com/albums/a...3/100_1731.jpg
http://i203.photobucket.com/albums/a...3/100_1733.jpg
Then i went to the back with my trusty hat and soldering iron to fix some really bad connections
http://i203.photobucket.com/albums/a...3/100_1824.jpg
Then I proceeded to clean the interior and freshen up the engine compartment sadly I could'nt find a picture of my interior after i cleaned it up so heres my current dirty interior
http://i203.photobucket.com/albums/a...3/PIC-0114.jpg
http://i203.photobucket.com/albums/a...3/PIC-0115.jpg
And my option list
http://i203.photobucket.com/albums/a...3/PIC-0125.jpg

Re: my truck build!!
 

Don't worry we took care of the regestraion and all that at least a month before we took it home haha my dad is always on the ball with that stuff

Re: my truck build!!
 

So the engine comparment got cleaned next
http://i203.photobucket.com/albums/a...3/100_1739.jpg
http://i203.photobucket.com/albums/a...3/100_1740.jpg
http://i203.photobucket.com/albums/a...3/100_1817.jpg
http://i203.photobucket.com/albums/a...3/100_1795.jpg
http://i203.photobucket.com/albums/a...3/100_1834.jpg
then a few days later the fuel pump crapped out fun..
http://i203.photobucket.com/albums/a...3/100_1878.jpg
http://i203.photobucket.com/albums/a...3/100_1880.jpg
Then the truck was enjoyed for a good 6-8month period while it got a true dual exhaust and other various things like a stereo higher output alternator, voltage regulator, new carb, ignition upgrade, new plug wires, spark plugs, and a really thorough cleaning

Re: my truck build!!
 

Then me and my bud got bored and said he said "hey maybe we should paint your bed it looks bad..." I agreed. http://i203.photobucket.com/albums/a...3/100_2430.jpg
http://i203.photobucket.com/albums/a...3/100_2431.jpg
and then after sanding and rust killing in the cheap spray paint primer stage
http://i203.photobucket.com/albums/a...3/100_2432.jpg
then all done
http://i203.photobucket.com/albums/a...3/100_2435.jpg
Then I got bored again and said hey dad lets fix the a/c since it still had a full charge of R12 and the clutch was just burned out on the compressor easy right? well it took about 6 straight hours but i got it! then the engine ate dirt
http://i203.photobucket.com/albums/a...3/100_2437.jpg
http://i203.photobucket.com/albums/a...3/100_2436.jpg

Re: my truck build!!
 

So i finally got outside today to take some pictures of the truck as it sits now waiting for its new engine. and as i tear down the engine piece by piece in the little spare time i actually have.
The timing chain sprocket pretty much ended up shearing itself on about half its circumfrence which was pretty bad
The timing chain was super slack and chewed up the timing cover on the way out as well
http://i203.photobucket.com/albums/a...3/100_2405.jpg
http://i203.photobucket.com/albums/a...3/100_2406.jpg
http://i203.photobucket.com/albums/a...3/100_2407.jpg
http://i203.photobucket.com/albums/a...3/PIC-0119.jpg
http://i203.photobucket.com/albums/a...3/PIC-0120.jpg
http://i203.photobucket.com/albums/a...3/PIC-0122.jpg its organized chaos at the moment under my hood
http://i203.photobucket.com/albums/a...3/PIC-0123.jpg
she also stopped running at 91280 miles exactly
http://i203.photobucket.com/albums/a...3/PIC-0124.jpg

Re: my truck build!!
 

and now in the present she is currently sitting under a tree right outside makes me sad the shes KIA but shes getting a new heart soon
My dad and I are planning on pulling the motor sometime in the next two weeks then poppin in a new crate 350 a week later so I'm pretty stoked
http://i203.photobucket.com/albums/a...3/PIC-0113.jpg
My lonely chevy
but on the lighter side of things as I cleaned up the garage for our garage sale i stumbled upon a pack of .30-06 Armor piercing rounds pretty sure these are really illegal http://i203.photobucket.com/albums/a...3/PIC-0111.jpg

Re: my truck build!!
 

Nice build!

Re: my truck build!!
 

thanks I do what I can to it during the school year and then splurge over the summer ,find more problems fix. rinse wash repeat type of thing. I need to find a job but right now its almost impossible too

Re: my truck build!!
 

mikajo
Thats a nice looking truck to start with ! Good luck with it :metal:
Thanks for all the pics

Re: my truck build!!
 

thanks! A thread isn't very good without pictures so I posted some. I've got tons my dad is the type who likes lots of pictures to document whats going on . Shes a pretty solid truck tad bit of rust in the driver side floor bout as big as a 50 cent piece and some rust in the rocker but otherwise shes clean which makes me happy. noticed your in turlock pretty close by! anyways should have some new posts soon so come check it out when i get more stuff up

Re: my truck build!!
 

/Good Job!!!
Thanks for sharing the picts..

Re: my truck build!!
 

keep at it....

Re: my truck build!!
 

Done a lot of work so far. Got my truck towed over to my uncle's so I could work on it, thanks to AAA. Soon as the truck got there we broke out the cherry picker disconected everything and pulled then engine. We got it on the stand and I began the teardown as my dad an uncle removed the transmission. I found some pretty bad looking bearings and a strange choclate milkshake looking mixture in some bolt holes which I think is water in the oil? Cylinder walls looked pretty good ridge at the top wasn't bad either. Cam had some flat lobes, and there was a lot of stuff in the pick up and the bottom of the pan. Picture TIME!
http://i203.photobucket.com/albums/a...3/100_2458.jpg
http://i203.photobucket.com/albums/a...3/100_2459.jpg
http://i203.photobucket.com/albums/a...3/100_2462.jpg
http://i203.photobucket.com/albums/a...3/100_2472.jpg
http://i203.photobucket.com/albums/a...3/100_2471.jpg

Re: my truck build!!
 

I had my transmission inspected and it was thrased( according to aamco) and they wanted to rebuild it for 2100 dollars NO WAY! SO we bought a new Tci streetfighter for half of that It just showed up yesterday so I don't have pictures yet but will soon. My new engine also showed up My powercrate 350 from yearone it made 403.6 hp at 5700 rpm and 414ftlbs at 3300 rpm. Pretty good for 2900 dollars, Everything is super clean and solid as well so I'm happy. While waiting for that to show up I did some cleaning primered my hood and other little things. The beer is my dad's Im a coke guy http://i203.photobucket.com/albums/a...3/100_2479.jpg
http://i203.photobucket.com/albums/a...3/100_2480.jpg The battery tray is thrashed and i don't want to buy a new one so I just cleaned it up http://i203.photobucket.com/albums/a...3/100_2483.jpg
and the hood http://i203.photobucket.com/albums/a...3/100_2474.jpg
found some rust in the rad support.. Blech! http://i203.photobucket.com/albums/a...3/100_2467.jpg
http://i203.photobucket.com/albums/a...3/100_2476.jpg
and then here is me caught off guard http://i203.photobucket.com/albums/a...3/100_2478.jpg

Re: my truck build!!
 

And the new engine! I forgot to post a picture I'm getting bad in my old age of 16 :lol: http://i203.photobucket.com/albums/a...100_2491-1.jpg
http://i203.photobucket.com/albums/a...3/100_2493.jpg
http://i203.photobucket.com/albums/a...100_2489-1.jpg
Yearone did a heck of a job crating this thing totally impressed!

Re: my truck build!!
 

Nice looking motor. I wish I had one of those when I was 16.

Re: my truck build!!
 

Well it certainly took a long long time to save for it, haha I was saving before the engine blew so when it did we toughed it out (me and my dad) for another month, and bought a yearone power crate. I'm really happy with it great worksman ship and dyno run for 2990.00 not bad in my book

Re: my truck build!!
 

So I hope you saved that original motor. 4 bolt block with a steel crank. Looks all original also. Cant beat that.

Re: my truck build!!
 

Great build so far

Re: my truck build!!
 

Yeah it's all my uncle's garage kept the crank, block and the heads, pistons and rods are sitting somewhere in there too.I don't know if the pistons and rods hold much value though

Re: my truck build!!
 

Thanks, I got a lot done and now I'm just enjoying it for the time being, now it needs body work and paint.

Re: my truck build!!
 

So, this Is a really old video before I had all the bugs straightened out, But it'll suffice till I get some time to take it to the back roads and burn off that right rear tire! :metal:

Re: my truck build!!
 

great work!