Bag install for 69 front
 

Hi Guys just fitted up bags as coil replacements on rear , ride height is a lot better , any help or advice ( pictures) on fitting front bags thanks in advance Ray

Re: Bag install for 69 front
 

Nice truck!
I suggest you search around in the suspension section. There are quite a few members on here that are running bags.

Re: Bag install for 69 front
 

Ray, what drop did the '69 have before the rear bags?

Search through several of the threads in the suspension section as lolife99 mentioned and you will be set. Even in some of the build pages (sub forum under the 67-72 Message Board) will have several install threads for you to read through as well.

Re: Bag install for 69 front
 

Are you keeping the drums up front? I suggest you upgrade to a later front suspension that includes disc brakes.

As far as adding bags, it's pretty simple. You remove the coils and ad mounting plates up top. You can use cups on bottom, or explore other options if you want to get lower.

Re: Bag install for 69 front
 

N2TRUX-
Are those plates from *****************? Looks like a good fit. Did you just use drop shocks or are you running different brackets too? Thanks

Re: Bag install for 69 front
 

Thanks N2Trux running drums and gonna stay that way at the moment

cheers Ray

Re: Bag install for 69 front
 

72BlackBeauty I think it was 4" all around , but that didn't give me the result I wanted , so I went the bag option which tucks the tyre nicely now for the front ...here's a pic before the bags


Cheers Ray

Re: Bag install for 69 front
 

Everything on my truck is from Air Ride Technologies. The shocks are shorter heavy duty fluid shocks with stock brackets.

Re: Bag install for 69 front
 

good lookin truck!! the rear looks a lot better....

Re: Bag install for 69 front
 

Those look like ART brackets.

edit: oops... should have read further in the post. What N2TRUX said.

Re: Bag install for 69 front
 

I just went though this and the best way is to cup the lower A arms 2 3/4" works perfect and gives a great ride and stance...

spraybomb has a great post on how to do it but it's basicly a 8"X23/4" piece of pipe a piece of flat stock and you cut out the lower spring pocket and weld in the pipe....

and the monroe 5257 works great for the drop