The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   I need a passenger side battery box picture..please. (https://67-72chevytrucks.com/vboard/showthread.php?t=362629)

jugernot 09-14-2009 05:22 PM

I need a passenger side battery box picture..please.
 
Can someone post a picture of the passenger side battery box. I need to see the area where the inner fender well connects to the batter box. Left and right side pictures of the battery box would be great.

WHY, you ask.

My inner fender wells are not installed yet. I'm trying to see if there is enough room to rum my AC lines between the two.

Thanks

jugernot 09-15-2009 05:43 PM

Re: I need a passenger side battery box picture..please.
 
What no replies from this chatty bunch. Oh oopps, sorry I forgot to say "PLEASE".

JimKshortstep4x4 09-15-2009 08:05 PM

Re: I need a passenger side battery box picture..please.
 
2 Attachment(s)
I don't have a very good picture but here is what I have. It is an AC battery box and the stock lines fasten to the extra bracket that is attached to the tray. This bracket aligns the two AC lines with the large holes that go through the radiator support.

Jim

unclewatts 09-15-2009 11:18 PM

Re: I need a passenger side battery box picture..please.
 
You do know that the bottom of the battery box bolts to the inner fender.

jugernot 09-16-2009 03:44 PM

Re: I need a passenger side battery box picture..please.
 
Quote:

Originally Posted by JimKshortstep4x4 (Post 3520356)
I don't have a very good picture but here is what I have. It is an AC battery box and the stock lines fasten to the extra bracket that is attached to the tray. This bracket aligns the two AC lines with the large holes that go through the radiator support.

Jim

Quote:

Originally Posted by unclewatts (Post 3520822)
You do know that the bottom of the battery box bolts to the inner fender.


Thanks for the replies, but I think I sould explain a bit more. I would like pictures of the battery box and inner fender installed, because we are running the AC and Heater hoses from the Vintage Air unit to the engine. We are tucking these hoses between the fender and the inner fender to conceal them. The hoses will emerge at about were the fender connects to the rad support next to the battery box. So I need to see how much room there is (if there is any) for the hoses to pass through the under side of the battery box near the inner fender. Or if I need to cut out holes in the lower triangular battery box support to run the hoses through.

I think this explains it, sorry for the confusion.

landsurvey1 09-16-2009 08:07 PM

Re: I need a passenger side battery box picture..please.
 
3 Attachment(s)
Here are some photos that might help. The tray without the battery is on the drivers side, but the dimensions are the same for both sides. From the radiator there is about 1 ½ inches. On the fender side there is 4 inches. The bottom of the tray almost touches the inner fender well as seen in the photos. Hope this helps.

jugernot 09-17-2009 08:26 PM

Re: I need a passenger side battery box picture..please.
 
Quote:

Originally Posted by landsurvey1 (Post 3522390)
Here are some photos that might help. The tray without the battery is on the drivers side, but the dimensions are the same for both sides. From the radiator there is about 1 ½ inches. On the fender side there is 4 inches. The bottom of the tray almost touches the inner fender well as seen in the photos. Hope this helps.


Thanks for the pictures. Well from the looks of things I will have to modify the underside support of the battery box and run the AC/Heater hosed through it.


All times are GMT -4. The time now is 04:43 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com