how about some laid out longbeds
1 Attachment(s)
everyone has a laid out shortbed. lets see some longbeds!
here is mine in progress looks much different now but you get the idea POST YOUR LONGBED PICTURES!! Attachment 514864 |
Re: how about some laid out longbeds
1 Attachment(s)
here's another
Attachment 514866 |
Re: how about some laid out longbeds
|
Re: how about some laid out longbeds
looks sweeet!
wish I was talented enough to do this lol.. |
Re: how about some laid out longbeds
Here is mine puts the lower controls arm on the ground and carrier bearing cross member on the ground too.
http://i16.photobucket.com/albums/b2...3/DSCF3805.jpg http://i16.photobucket.com/albums/b2...3/DSCF3808.jpg |
Re: how about some laid out longbeds
1 Attachment(s)
this is my 70 lwb
|
Re: how about some laid out longbeds
1 Attachment(s)
Heres mine almost all the way down....
|
Re: how about some laid out longbeds
Cool I love me some longbeds a very long time too lol
|
Re: how about some laid out longbeds
3 Attachment(s)
best I can do and still work it like a truck..I need bed space to haul my camper and fire wood...Now that I added some bling I guess I need to get a coulpe new pozer pics
|
Re: how about some laid out longbeds
haha thats sweet Hottrucks
|
Re: how about some laid out longbeds
Cool! this is going to be a good thread, Subscribed :metal:
|
Re: how about some laid out longbeds
2 Attachment(s)
Here's my 72 GMC, it's not laid out but it's a long bed. It's as low as I can go without choppin stuff up.
|
Re: how about some laid out longbeds
[quote=70RedBlurr;3629818]Here is mine puts the lower controls arm on the ground and carrier bearing cross member on the ground too.
Quote:
|
Re: how about some laid out longbeds
Kev2809, My suspension is cupped lower control arms, swap to disc brakes from a '76 truck, RE-6's, top plates, and finished the front off with DJM three inch lowering spindles. The rear is a Air Ride Tech. triangulated four link, FBI notch, and RE-7's.
Here's a pic of the rear. kinda hard to see but all I have on my laptop. http://i16.photobucket.com/albums/b2...3/DSCF3611.jpg |
Re: how about some laid out longbeds
2 Attachment(s)
i have stock trailing arms in back with sleeve bag with watts link, front is 3 inch drop spindles cut lca 2inch zed frame and 1inch section crossmember with slam re7 and notched the uca to clear steering shaft
|
Re: how about some laid out longbeds
more...... plz? :-)
|
Re: how about some laid out longbeds
http://i556.photobucket.com/albums/s...z/IMG_2906.jpg
http://i556.photobucket.com/albums/s...z/IMG_2903.jpg mine before i hung it up on a man hole. |
Re: how about some laid out longbeds
Love the pics, especially the red one, I saw a pic of it on here last year and it was just the kick in the backside I needed to get moving on mine. Super clean.
Heres mine, again not quite laid out, its sitting on bumpstops though. Its about to get 20" steelies and a chopped front crossmember, so then she'll be down good and hard. http://67-72chevytrucks.com/gallery/...0/P1010811.JPG The whitewalls are painted on, the back one looks humped as I had the exhaust dumping in front of it. |
Re: how about some laid out longbeds
Texastrendz you should change it to a line for each bag in case something gives you don't have one end just drop on you.
|
Re: how about some laid out longbeds
Quote:
|
Re: how about some laid out longbeds
man that is 3000 psi steel braided hydraulic hose, it will cut through the metal before the metal cuts the hose. i will never have a failure with this setup. all my trucks i do i use hydraulic hose. and no leaks either. lol. it is expensive to use. but i like the insurance of it.
|
Re: how about some laid out longbeds
is that hose from like a big rig shop?
edit - what kind of panhard bar is that? |
Re: how about some laid out longbeds
Quote:
|
Re: how about some laid out longbeds
2 Attachment(s)
Here is the 86er..
|
Re: how about some laid out longbeds
2 Attachment(s)
well I said I would get you some current pics
|
All times are GMT -4. The time now is 06:51 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com