The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   projects and builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=197)
-   -   66 springs (https://67-72chevytrucks.com/vboard/showthread.php?t=402215)

SRVBLUES64 05-11-2010 10:54 PM

66 springs
 
can and how do I cut my springs to lower my 6 chevy c10 in the back and front?

Steve Van Gent 05-12-2010 02:25 PM

Re: 66 springs
 
In my experience on half-ton, you can pull front springs and chop one coil out without any ill effects, 2 starts to cause alignment problems. On the rear, you need to buy new coils (chevy Duty, $100 pair). If you go past 3 inches, you will need a new pan-hard bar. I dropped rear to 3 inches, too high, 5 inches, too low, now I am shooting for 4 inches.

IMHO

Steve


All times are GMT -4. The time now is 08:22 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com