Extra parts
3 Attachment(s)
New Prices!!!!! 10/26/10
Complete front disc brake setup off of my 68 S/C truck. 2 1/2 McGaughy (http://www.mcgaughys.com/carproductssuspension.htm) dropped spindles (73-87) , rotors, bearings, dust shields, calipers and lines. Around a 1000 miles on all. I'm upgrading to a bigger rotors. So, I'm basically taking the spindle loose at the ball joint and everything goes with it. - ** SOLD ** I also have a 71/72 5 lug rearend. Heavy duty drums, open carrier, not sure of the gears. It has been setup of for a bolt in Porterbuilt rear dropmember. - $150 (no shipping). Nice OEM trailing arms - ** SOLD ** 3.73 ring and pinion with carrier (open), diff cover and yoke - $125 + shipping New CPP rear shock reinforcements (73-87) - $25 shipped New CPP disc/disc proportioning valve - **SOLD LOLIFE** New CPP Braided stainless steel front brake line kit - ** SOLD ** LoKar stainless braided dipstick - ** SOLD ** ECE super track bar (no brackets) $60 + shipping ** SOLD TO LOLIFE99 ** 4 ralley wheels (either 4 15 x 8s or 2 15x7's and 2 15x8's) with centers and rings - $100 |
Re: Extra parts
Interested in the proportioning valve and stainless lines... can you tell me more?
Is the proportioning valve a disc/disc valve? What lines are included? Thanks |
Re: Extra parts
in line for brake line kit and valve. which lines are in the kit?
|
Re: Extra parts
1 Attachment(s)
Quote:
Quote:
R/ |
Re: Extra parts
im out, thanks
|
Re: Extra parts
The tires and wheels wouldn't happen to be for sale would they?
|
Re: Extra parts
Quote:
Adding parts: 72 rear end ECE super track bar (no brackets) Nice OEM trailing arms |
Re: Extra parts
LoKar stainless braided dipstick - $40 shipped
What is the part #? |
Re: Extra parts
Rob is there any wiggle room if I take the front brake set-up? Not really interested in the spindles, would like stock type to retain current drop. Check shipping to 28716, I will try to get cap sent out this week. Harold
|
Re: Extra parts
Quote:
Quote:
|
Re: Extra parts
I will take the brake lines and dipstick if they make it to me? Thanks Matt
Posted via Mobile Device |
Re: Extra parts
will the drop spindles fit on the 73-87 ball joints woth 1" rotors if so maybe harold an i can work a deal with you. just a thought
|
Re: Extra parts
Part number for the proportioning valve?
|
Re: Extra parts
Quote:
Quote:
Quote:
|
Re: Extra parts
supertrack bar doesnt have the brackets to connect it to trailing arm then?
|
Re: Extra parts
Summit shows #5008 for LS1 engines, do you know if this will fit standard SBC block? Any pics? Tks
|
Re: Extra parts
Rob if 72swb takes the spindles, what kind of money for the everything else. The lines you are including are the hard lines I assume for a 71-72? I will take the rotors, bearings, shields, calipers, and the prop valve. If you are willing to let the 5 lug axle shafts from the 72 rear go I would take them as well. Shoot me a price and lets make a deal :) Harold
|
Re: Extra parts
Quote:
Quote:
Quote:
R/ |
Re: Extra parts
Rob no problem better to sell it all together. lmk if something changes. thanks, harold
|
Re: Extra parts
you have to use the right size spindle for the right size rotor or it will cuase a lot of problems thanks for looking for me.
|
Re: Extra parts
I will pass on the dip stick, just in case it will not fit. Tks for checking.
|
Re: Extra parts
I'll take the Super Track Bar.
Shipping will be to 65251. PM me for payment info. |
Re: Extra parts
Quote:
Quote:
Quote:
Quote:
Quote:
Rob |
Re: Extra parts
Paypal sent for ECE Super Track Bar.
Thanks! |
Re: Extra parts
Quote:
Quote:
R/ |
All times are GMT -4. The time now is 03:51 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com