Parting out '72 GMC
5 Attachment(s)
I bought this '72 Long bed from a guy that I work with. I was going to build it and drive it, but as many of us know money has gotten tight, especially being the Christmas is right around the corner. I will post the pictures up this afternoon if all goes well. Please feel free to PM me any questions or concerns you might have.
Entire truck as it sits -- $1200 obo Exterior mirrors -- SOLD Throttle Linkage -- SOLD Headliner and Trim -- SOLD Passenger Door -- $150.oo or obo Front Bumper -- SOLD Driver Door -- $150.00 or obo Driver side Fender -- $100.00 or obo Kickdown Bracket -- SOLD Passenger side Fender -- $100.00 obo V8 Towers -- SOLD 4 core Radiator -- $100.00 obo Accelerator pedal assembly -- SOLD Front sway bar -- $75.00 obo 1968 - 72 Chevy/GMC Hood -- $175.00 or obo GMC Core Support -- $50.00 obo Drive shaft -- $25.00 obo Steering Wheel Grant GT -- SOLD Master cylinder booster pump and proportioning valve, comes with bracket and rod -- $200.00 or obo Bench seat -- $75.00 or obo Turbo 400 Transmission - $400.00 or obo Power steering box -- $75.00 or obo Inner fenders (left & right) -- $50.00 for the pair obo Hood hinges -- $30.00 for the set -- or obo Gas tank -- $75.00 or obo Rear end (I'm not sure the gearing or posi, but I will find out. Truck was running and driving less than a month ago) -- $300.00 or obo AC CAb -- $300.00 or obo Dash Pad -- SOLD Transmission cross member -- $75.00 or obo Long bed, bed liner -- $50.00 or obo Brake pedal assembly -- $30 A/C and Heater control -- $80 Shifter linkage -- $40 HEI distributor -- $75 Thank you, Richard |
Re: Parting out '72 GMC
Is there an engine? Sorry if I missed it, im on my phone. And where in al are you? May be interested in whole truck.
Posted via Mobile Device |
Re: Parting out '72 GMC
How much for transmission lines if in one piece shipped to zip 32136? Thanks
|
Re: Parting out '72 GMC
5 Attachment(s)
There is no engine.
A few more pictures |
Re: Parting out '72 GMC
I will have to check the transmission lines when I get home.
|
Re: Parting out '72 GMC
is 1/2 or 3/4 ton?
|
Re: Parting out '72 GMC
It's a 1/2 ton long bed
|
Re: Parting out '72 GMC
Tail light chrome trim??
|
Re: Parting out '72 GMC
The tail lights do not have chrome trim.
|
Re: Parting out '72 GMC
front disc brake, brake lines, all from master cylinder/ pv and to both sides along the crossmember?
|
Re: Parting out '72 GMC
So you are wanting to know what my price would be for the complete K member with brake lines intact? Or are you asking about the transmission crossmember.
|
Re: Parting out '72 GMC
I could use the steel e-brack cable ans connectors.
|
Re: Parting out '72 GMC
1 Attachment(s)
How much for both door regulators and this bracket off the booster? Any tach dash or tilt steering? what color is the interior? might be interested in the headliner and seat beats. is the grant steering wheel the woodgrain one? thanks
|
Re: Parting out '72 GMC
Sorry to sound confusing, I just need the actual brake lines...no crossmember. Switching to disc brake front on my '69....
Quote:
|
Re: Parting out '72 GMC
PM sent
|
Re: Parting out '72 GMC
interested in the doors! what shape are they in?
|
Re: Parting out '72 GMC
Do you have a jack, jack handle and tire iron for a 1972 C10?
What about an auxilary battery tray? Both need to be in good condition. |
Re: Parting out '72 GMC
Both doors are in good shape. I should have pictures up later on today.
|
Re: Parting out '72 GMC
I'm sorry I do not have an aux battery tray, and I will check for the jack, jack handle and tire iron when I get home.
|
Re: Parting out '72 GMC
Happen to have a passenger side sport mirror?
|
Re: Parting out '72 GMC
It does have a sport mirror on the passenger side, but the mirror itself is cracked.
|
Re: Parting out '72 GMC
Quote:
|
Re: Parting out '72 GMC
I would like to get in line on the doors pending pictures. Also where in Alabama are you located ?
|
Re: Parting out '72 GMC
I am located in Headland, AL. Roughly 9 outside of Dothan
|
Re: Parting out '72 GMC
A few pictures added, I will finish adding the rest tonight or tomorrow. My camera is on the fritz for some reason
|
All times are GMT -4. The time now is 02:39 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com