Norcal spare parts
5 Attachment(s)
I am forced to downsize. My new house has about 6 less parking spots. I have most of the parts needed to put together three complete 60-66 shortbed stepside trucks, plus lots and lots and lots of spare parts. I will sell either complete project trucks, or I will part everything out. I hate to part with them.
I am keeping two trucks as my daily drivers and selling everything else. I will sell a complete project truck for $1200. they are all pretty much rust free. I have replaced the rusty parts with good ones. the cabs are not the original ones on the frames. I would prefer to sell the trucks complete and the parts separate, but I will do whatever necessary to get rid of my excess stuff.I have quite a few more parts than what is pictured here, I will update as I get them out of storage. I am not familiar with this forum. this is my first time using the forum. let me know what parts you need and I will post prices. |
Re: Norcal spare parts
Any 61 grilles?
|
Re: Norcal spare parts
I have a complete GMC 60-63 truck and a lot of spare parts for the early style that is still in storage. the storage is about 300 miles from where I currently live. when I make enough room to bring up more stuff I will make another thread with the early stuff. I have a couple early grills, but I cant remember exactly what year or style
|
Re: Norcal spare parts
Hey if you have any good 62 grilles I would definatly buy it off you!
|
Re: Norcal spare parts
Hello Norcal... I am looking for a nice OE drivers side vent window handle for a 65 C10 LWB Fleet. I would take the pair if you have them. Do you have any good chrome bumpers? Also do you have a nice pair of inside sun visors for the same C10? Thank you...
|
Re: Norcal spare parts
I am in need of 1 side of interior door handles, also the 2 top radiator support mounting braces, and am looking for a passenger side c10 mirror.
|
Re: Norcal spare parts
I do not have any chrome bumpers. I do not have any stock exterior mirrors. I have at least one pair of complete vent window assemblies in good condition, with knobs. I will dig though my pile of handles and post pics. what top radiator braces do you need? those panels that bolt on each side of the latch? I will also look for sun visors, I might have some but probably not that great of condition.
|
Re: Norcal spare parts
Part #13 in this pic. I need both of those braces. Also if you have the rubber mounts for the stock radiator too, part # 11. let me know.
http://www.lmctruck.com/icatalog/cbe/750w/0035.jpg |
Re: Norcal spare parts
How about NICE front fenders, no filler, rust etc??
|
Re: Norcal spare parts
I have the braces, I will get pictures up soon.
I will dig up the nicest fenders I have and post pictures. I live about 5 miles from where the trucks in the pic are parked, so I cant run and check too often. |
Re: Norcal spare parts
hey, i need the headlight buckets, adjusters and springs for a 64 -5-6 both sides. got any. i wish you were closer id have a cab for my truck! also interested in good front fenders. and a fleet tailgate? thanks i understand about not being very close to the trucks so i'll be patient.
|
Re: Norcal spare parts
I will spend my Friday afternoon digging through parts.
I will have answers and pictures in the afternoon. Zoo, you could probably get an entire truck shipped out.. |
Re: Norcal spare parts
shippings a killer from ca to tn! but maybe youll have some of the items i need. thanks
|
Re: Norcal spare parts
I have an account with fedex and I know how to box stuff up so it is as safe and cheap as possible. I will include shipping costs with my parts quotes as best I can.
|
Re: Norcal spare parts
do you have a complete heater assembly and or vent window assembly for 60-63? zip 92821
|
Re: Norcal spare parts
and 60-63 custom sail trim!!
|
Re: Norcal spare parts
Ok Allen I found a set of door handles here in my garage. So when you get the chance quote me those two radiator brackets to 12586. thanks
|
Re: Norcal spare parts
2 Attachment(s)
well, so far I have found one of the radiator covers and two drivers side sun visors. there was a 60-63 style passenger side vent window.
I am still looking for other stuff. |
Re: Norcal spare parts
4 Attachment(s)
here are a few more parts I found around the house. if you see something your interested in I can get better pictures.
I kinda like the grill, I had thoughs of using it as garage wall art, but I really need to downsize. |
Re: Norcal spare parts
Hey there Allen,
It's Bob, I was up there Sunday looking for the driveline support (found it here since then) Did you post a picture of that 60-61 GMC hood yet? Looks like you found some interest in your stuff, Hunh? |
Re: Norcal spare parts
Quote:
Thanks for pointing me at this forum, I like it. |
Re: Norcal spare parts
The picture of the grille is a 61. Don't care if it has surface rust but hows the dents? And how much if I come get it?
|
Re: Norcal spare parts
the outer shell of the grill has surface rust, nothing rotted through. the aluminum center is tweaked and dented. here is a couple photobucket links to a closeup. I have no clue what its worth, I have a thread in here trying to get an idea but no responses.
it must be worth a lot if your willing to drive from Lodi.... I used to live in Lodi and Stockton. Paz performance sponsered my 67 truck at 99 speedway seriously, I have no clue. how about $100? Grill grill other side |
Re: Norcal spare parts
For $100 I'll pass. Thanx anyways.
|
Re: Norcal spare parts
do u have automatic column?
|
All times are GMT -4. The time now is 03:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com