In the beginning there was a 69 party (eyebrows up)
5 Attachment(s)
I bought my 69' C10 SWB Dec. 31, 2010. Knowing that I was going to be doing a ground up, older school hot rod (not old school) on this project, I figured some harmless, inebriated, contributions to the cause would be fun. (Given the flirty 69' year model and the fact that is was new years eve...)
As to not bore anyone with too many pesky words and descriptions, I'll start with the bright shinny pictures, some what pop-up-book style, just to get your attention. As purchased Dec. 31, 2010 Rattle can white, plywood floor board (yep, covering huge holes), and an engine bay full of wires going nowhere. Prepare to be amazed! |
Re: In the beginning there was a 69 party (eyebrows up)
5 Attachment(s)
Durring the New Years Party, I had a brilliant idea. Who wants to tag the Truck?
|
Re: In the beginning there was a 69 party (eyebrows up)
5 Attachment(s)
I know what your thinking.... OH MY BGOD WHAT IS WRONG WITH THIS GUY?!? Its ok. The paint is going away. It was a good time, a great memory, and everyone always asks about the truck...
|
Re: In the beginning there was a 69 party (eyebrows up)
Haha looks like a party I might be at!
|
Re: In the beginning there was a 69 party (eyebrows up)
3 Attachment(s)
On to the build. I started with chassis. Replace everything with new components and bagN the son-O-gun.
|
Re: In the beginning there was a 69 party (eyebrows up)
5 Attachment(s)
While I waited on parts and peices to arrived, the typical cleaning and degreasing and bla bla bla stuff went on. I decided to remove body molding, mirrors and such and start filling holes.
|
Re: In the beginning there was a 69 party (eyebrows up)
3 Attachment(s)
Then the system arrived.
|
Re: In the beginning there was a 69 party (eyebrows up)
2 Attachment(s)
Just to clean things up a tad I spent a ton of time grinding.
BEFORE! |
Re: In the beginning there was a 69 party (eyebrows up)
4 Attachment(s)
After
|
Re: In the beginning there was a 69 party (eyebrows up)
5 Attachment(s)
Then clear coated
|
Re: In the beginning there was a 69 party (eyebrows up)
5 Attachment(s)
With all the wore out stuff replaced, disc breaks installed and the front bagged I moved on to the rear.
|
Re: In the beginning there was a 69 party (eyebrows up)
Of coarse a 6 to 5 lug was in order
|
Re: In the beginning there was a 69 party (eyebrows up)
3 Attachment(s)
Cleaning and prepping the rear. My beautify girlfriend made a cameo appearance and did a great job DE-Gunking the rear end.
|
Re: In the beginning there was a 69 party (eyebrows up)
3 Attachment(s)
welded in my c-notches. I plan on having my bed floor tilt up and I want my frame to look factory-ish.
|
Re: In the beginning there was a 69 party (eyebrows up)
4 Attachment(s)
with the master cycl / booster, and one sided rattle can flames installed I was ready to move it again.
|
Re: In the beginning there was a 69 party (eyebrows up)
3 Attachment(s)
I went back and replaced my trailing arm bushings, trimmed my crossmember a tad, and primed and painted.
|
Re: In the beginning there was a 69 party (eyebrows up)
3 Attachment(s)
An adjustable panhard rod is needed I think... The frame was way off center.
|
Re: In the beginning there was a 69 party (eyebrows up)
3 Attachment(s)
Centering and centering and centering and... (you are freaking out man!)
|
Re: In the beginning there was a 69 party (eyebrows up)
4 Attachment(s)
Now to pre install my gas tank, and build all my brackets for my air system and to relocate my battery. Once all of it is installed and I am happy about them. It will all be removed and the frame finished prepped and then painted.
|
Re: In the beginning there was a 69 party (eyebrows up)
3 Attachment(s)
We threw the bed back on so I would know what I had to work with. And to allow me to make some adjustments for how I want it to sit aired out and ride hight. The rear will be coming down another 3/4" and I will be done with how I want it. for now...
|
Re: In the beginning there was a 69 party (eyebrows up)
I'm ending the 4th month of my build and I get excited and inspired when I come to this site and check out everyone's builds. It's cool to be apart ot it! Thanks. I'll keep yousGuys posted.
|
Re: In the beginning there was a 69 party (eyebrows up)
what wheel and tire size are you running? I kinda have the same story with my truck. With it sitting helplessly in the garage on my bithday my friends showed up for the party and after a few hours of fun my truck had a new shade of color. my wife played the key role due to a fact that my truck was 13 different colors and she hated to ride in it. she use to say that it looked like a crayola box threw up on it.
|
Re: In the beginning there was a 69 party (eyebrows up)
Man this is looking great...the tagging idea cracked me up !! great idea
|
Re: In the beginning there was a 69 party (eyebrows up)
Nice work! Those rear tires look HUGE!
|
Re: In the beginning there was a 69 party (eyebrows up)
Love the stance :metal:
Posted via Mobile Device |
All times are GMT -4. The time now is 04:11 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com