The 1947 - Present Chevrolet & GMC Truck Message Board Network - 8 Lug Rear Drums with new bearings installed for 3/4 ton for sale

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - 8 Lug Rear Drums with new bearings installed for 3/4 ton for sale (https://67-72chevytrucks.com/vboard/showthread.php?t=52006)

kostinkopower

05-08-2003 04:36 PM

8 Lug Rear Drums with new bearings installed for 3/4 ton for sale

I have 2 used,8 lug rear drums with new bearings installed.They were removed from a 1971 Chevy 2wd pickup.The truck was junked just after the bearings were replaced.The bearings were very exspesive.Any offers?I can even remove the bearings if prefered.

Edmond

05-09-2003 07:32 AM

:( To bad I live in the Netherlands... :(

I would have taken them!!

Cya,
Edmond
:bowtie:

kostinkopower

05-09-2003 01:15 PM

Yes,I hate to junk them.I now have a 1969 k-10 and never the need for them.I've been to Amsterdam.It is nice there.Later,Joe

breeh

05-09-2003 02:02 PM

What type of rearend? Eaton or Dana?

kostinkopower

05-09-2003 05:12 PM

I'm not sure.What differences are there to identify?

breeh

05-09-2003 08:05 PM

1 Attachment(s)

This is an Eaton....

breeh

05-09-2003 08:06 PM

1 Attachment(s)

This is a Dana

kostinkopower

05-10-2003 03:36 PM

it is definately an Eaton.

breeh

05-10-2003 07:08 PM

OK, thanks. I need Dana stuff...

67sss

05-10-2003 07:57 PM

Dana stuff

1 Attachment(s)

Hey breeh what ya looking for , here's a 60--4:11 the other one is a 3:08 ,both non posi

breeh

05-10-2003 10:25 PM

Thanks 67sss but I am just thinking about replacing bearings. If one of those had a powerlok then that would be a different story!

All times are GMT -4. The time now is 09:32 PM.