The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 1 of 8 1 23456 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   AZ Billet Aluminum Radio Plates (https://67-72chevytrucks.com/vboard/showthread.php?t=660415)

mahanian 02-16-2015 11:58 AM
Billet Aluminum Radio Plates
 
5 Attachment(s)
I've received a lot of interest for more of these so I'm going to make another batch. I have a couple left, ready to ship

The cost will be $88 (a little cheaper than previously because of the new design using less material) plus $4.50 for shipping. That includes all the fasteners, the drill template and polishing rag.

I will take a USPS money order or if you want to pay with Paypal please add $3 for Paypal fees. Send me a PM if you want one and also post in the thread.

rob32472 02-16-2015 12:33 PM
Re: Billet Aluminum Radio Plates
 
I will take one

boynton 02-16-2015 02:56 PM
Re: Billet Aluminum Radio Plates
 
I will need another one in the near future so joining the thread. Just for clarification these are already polished? They look like they are. These are a great product if you haven't seen one in person. I really enjoyed the one I put on my 1970 lwb.

mahanian 02-16-2015 04:14 PM
Re: Billet Aluminum Radio Plates
 
Correct, that price is fully polished. Glad you liked the first one!

1968aj 02-16-2015 04:33 PM
Re: Billet Aluminum Radio Plates
 
Are these for cut or uncut dash?

snipescastle2 02-16-2015 04:33 PM
Re: Billet Aluminum Radio Plates
 
I'll take one too....
Ben Smith:metal:

rkintn_68 02-16-2015 05:25 PM
Re: Billet Aluminum Radio Plates
 
Nice !!!

knomadd 02-16-2015 05:53 PM
Re: Billet Aluminum Radio Plates
 
I bought one of these from you within the last year or two. I love it! It looks fantastic and couldn't be happier! So THANKS!

How much extra material is cut out for a newer stereo, compared to your previous design? I'm thinking of replacing my stereo and wondering how much material I'd have to cut out of the one I have now.

mahanian 02-16-2015 07:04 PM
Re: Billet Aluminum Radio Plates
 
Quote:
Originally Posted by knomadd (Post 7051525)
I bought one of these from you within the last year or two. I love it! It looks fantastic and couldn't be happier! So THANKS!

How much extra material is cut out for a newer stereo, compared to your previous design? I'm thinking of replacing my stereo and wondering how much material I'd have to cut out of the one I have now.
Glad to hear you like it! :chevy:
The only difference is the trim ring opening for the stereo, you could use any stereo in the one you have, I also reduced the total height by 0.050" so my machinist could use smaller aluminum stock and save everyone a few bucks.

knomadd 02-17-2015 10:51 AM
Re: Billet Aluminum Radio Plates
 
Quote:
Originally Posted by mahanian (Post 7051645)
Glad to hear you like it! :chevy:
The only difference is the trim ring opening for the stereo, you could use any stereo in the one you have, I also reduced the total height by 0.050" so my machinist could use smaller aluminum stock and save everyone a few bucks.
Awesome! Thanks for the info.

Crushkrew 02-17-2015 11:32 PM
Re: Billet Aluminum Radio Plates
 
I would like one...pm sent...thx

mahanian 02-23-2015 09:20 PM
Re: Billet Aluminum Radio Plates
 
ttt

SMKN TA 95 02-24-2015 10:28 AM
Re: Billet Aluminum Radio Plates
 
I will definitely take one.

mahanian 02-28-2015 11:54 AM
Re: Billet Aluminum Radio Plates
 
ttt

bagged01extcab 03-01-2015 11:14 AM
Re: Billet Aluminum Radio Plates
 
I will take one or two when they r ready

min 03-01-2015 04:27 PM
Re: Billet Aluminum Radio Plates
 
I will take one when they are ready.

mahanian 03-01-2015 04:38 PM
Re: Billet Aluminum Radio Plates
 
Quote:
Originally Posted by bagged01extcab (Post 7070999)
I will take one or two when they r ready
Quote:
Originally Posted by min (Post 7071440)
I will take one when they are ready.
Sounds good, keep in mind I will not include shipping if they are purchased after they are ready so the price will be $6 more

Beach Burb 03-07-2015 09:28 AM
Re: Billet Aluminum Radio Plates
 
I'll take one, PM sent.

tonkatrux2 03-07-2015 10:33 AM
Re: Billet Aluminum Radio Plates
 
you have these ready to ship. thank you

mahanian 03-07-2015 11:43 AM
Re: Billet Aluminum Radio Plates
 
Quote:
Originally Posted by Beach Burb (Post 7079766)
I'll take one, PM sent.
PM sent

Quote:
Originally Posted by tonkatrux2 (Post 7079827)
you have these ready to ship. thank you
No, I will post in the thread when I have them in hand ;)

Umaldonado 03-09-2015 05:48 PM
Re: Billet Aluminum Radio Plates
 
ill take one. please pm me.

mahanian 03-11-2015 11:39 AM
Re: Billet Aluminum Radio Plates
 
Dropped them off at the polisher this morning, should have them by the end of next week and start shipping them over the weekend

bagged01extcab 03-11-2015 01:04 PM
Re: Billet Aluminum Radio Plates
 
Pm me your PayPal and I will go ahead and pay for my two

tonkatrux2 03-11-2015 01:08 PM
Re: Billet Aluminum Radio Plates
 
I will take two pm your info thanks and total

Big hec 03-12-2015 03:18 PM
Re: Billet Aluminum Radio Plates
 
Nice, i'll get with you, (hopefully soon) to get one.


All times are GMT -4. The time now is 03:51 PM.
Page 1 of 8 1 23456 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com