The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)

- - CA Cummins swap kit (https://67-72chevytrucks.com/vboard/showthread.php?t=679107)

Cummins swap kit

Rob Bonney fab cummins motor mount, filter mount and dual battery tray also comes with ump filter and housing

950 shipped that's over a 200 saving for brand new parts...

Also have a compound turbo p-pump 24 valve for sale for 4k firm pm for more details

Re: Cummins swap kit

Will you sell just the motor mounts?

Re: Cummins swap kit

Would like to keep it as a package for now. I'll let you know if I decide to break it up

Re: Cummins swap kit

sending it back up top.

Re: Cummins swap kit

Back to the top guys and gals may split it up...

Re: Cummins swap kit

Got any pics?
Couldn't find any on his facebook

Re: Cummins swap kit

Filter and housing. Pics are from 4btswap I can get more pics for those interested

Re: Cummins swap kit

Keeping it all except the motor mount. 375 shipped.

Re: Cummins swap kit

Keeping it all minus the motor mount crossmember fully welded for 300 shipped

Re: Cummins swap kit

Do you know if the crossmember will work on a 4BT? I would be interested in it if it will.

Re: Cummins swap kit

don't think so but you could ask RobBonneyFab@gmail.com 602 370 7955

Re: Cummins swap kit

Btt all prices are obo... also have a partial mid mount setup available

Re: Cummins swap kit

Also have a built 47re billet input, triple disc convertor, ats valve body upgraded clutch pack and more for 3200 firm

Re: Cummins swap kit

What controller were you planning on running for the 47re? Would this be available also?

Re: Cummins swap kit

Does the mount fit 87 R30 chassis?

Re: Cummins swap kit

Will fit 3/4 and 1 ton frames. No trans controller was going to run an anteater controller

Re: Cummins swap kit

Quote:

Originally Posted by boonedogs72 (Post 7929950)

Will fit 3/4 and 1 ton frames. No trans controller was going to run an anteater controller

2wd or 4wd?

Re: Cummins swap kit

I like that battery tray. What side does it mount to?

DW

Re: Cummins swap kit

driver, think it could mount on ether side though.

Re: Cummins swap kit

Btt make an offer want all this gone