The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Heavy Haulers (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=239)
-   -   79 c30 quad cab project (https://67-72chevytrucks.com/vboard/showthread.php?t=679698)

Jclark13 08-17-2015 09:42 PM

79 c30 quad cab project
 
1 Attachment(s)
Well I just bought this truck it's a old city truck good shape for a rust belt truck looking fore ideas been thinking bagging but wanna use it as a toy hauler it's a 454 4 speed truck
Posted via Mobile Device

C10 - C90 Bill 08-17-2015 10:00 PM

Re: 79 c30 quad cab project
 
I like the 4-Speed part.

Too many were Autos.

Jclark13 08-17-2015 10:47 PM

Quote:

Originally Posted by C10 - C90 Bill (Post 7276904)
I like the 4-Speed part.

Too many were Autos.

It's a pretty sweet set up my first 2wd one looking for any info or pics of bag setups that will be strong enough to haul a 26ft goose neck if it's possible
Posted via Mobile Device

mud.man.rj 08-17-2015 10:48 PM

Re: 79 c30 quad cab project
 
Looks like a great start for a hauler..

jumpsoffrock 08-18-2015 11:58 AM

Re: 79 c30 quad cab project
 
Interior pictures? Looks like a great truck. I didn't actually know they were made in manual versions by that point.

KQQL IT 08-18-2015 12:32 PM

Re: 79 c30 quad cab project
 
Quote:

Originally Posted by jumpsoffrock (Post 7277480)
Interior pictures? Looks like a great truck. I didn't actually know they were made in manual versions by that point.

I have a 91 3500 with a SM465

Jim Timber 08-18-2015 01:13 PM

Re: 79 c30 quad cab project
 
I had a SM465 in a `86 K5 Jimmy and wish I'd kept that truck.

jumpsoffrock 08-18-2015 02:10 PM

Re: 79 c30 quad cab project
 
Wow, and again I know nothing about trucks apparently.

That's a heck of a transmission for those trucks, too(thought they were reserved for medium duty trucks). Also a little surprised they didn't have an overdrive in the 1991 3500.

KQQL IT 08-18-2015 04:04 PM

Re: 79 c30 quad cab project
 
I was too. Wished it was.

Jclark13 08-18-2015 05:53 PM

1 Attachment(s)
It's a pretty sweet set up only one I have seen with a stock 4 speed
Posted via Mobile Device

Jclark13 08-18-2015 05:57 PM

1 Attachment(s)
Quote:

Originally Posted by jumpsoffrock (Post 7277480)
Interior pictures? Looks like a great truck. I didn't actually know they were made in manual versions by that point.

It's stock interior duel bench both in pretty bad shape will be pulling out to install king ranch bucket seats out of 05 f250
Posted via Mobile Device

junkmandan3 08-21-2015 11:39 PM

Re: 79 c30 quad cab project
 
Clark-------Big block with that 4 speed granny gear trans , should pull stumps, but it's probably gearbound . Looks good !

Jclark13 08-22-2015 09:05 AM

Quote:

Originally Posted by junkmandan3 (Post 7281269)
Clark-------Big block with that 4 speed granny gear trans , should pull stumps, but it's probably gearbound . Looks good !

Yeah I'm not sure I know the tranny final gear is 1:1 no od iv been thinking a nv 4500 5 speed swap but I love the low first on a sm465
Posted via Mobile Device

C10 - C90 Bill 08-22-2015 05:24 PM

Re: 79 c30 quad cab project
 
Before going through all the trouble of a NV 4500 swap, try Taller Tires on the rear. I did that on my pick-up and it worked pretty good. I still wouldn't want to run the interstate all day with it, but I was satisfied with the difference.

Advanced Design 08-22-2015 09:18 PM

Re: 79 c30 quad cab project
 
Welcome Clark!

If you want to drop it here is a thread on the subject for a C30....http://67-72chevytrucks.com/vboard/s...d.php?t=669016

special-K 08-23-2015 10:48 PM

Re: 79 c30 quad cab project
 
I'm laughing at myself. I saw the quad cab title and expected to see 8 doors! I call crewcabs double cabs because they are double what a regular cab is, two seats instead of one or four doors instead of two. By the responses, I guess no one else thinks that way

C10 - C90 Bill 08-23-2015 11:08 PM

Re: 79 c30 quad cab project
 
I believe those trucks are also known as 3 X 3's. There is usually a 3 X 3 Emblem on the side of the cab. For many years I never knew what it meant, but finally found a few years ago: 3 in the Front and 3 in the Back.

Jim Timber 08-24-2015 12:29 AM

Re: 79 c30 quad cab project
 
Manual on the floor would bring riding ***** to a new level in the front. :lol:

Is there any market for those old bench seats in excellent condition? The one in my C65 is pristine. I'm thinking it'll end up in the hunting lounge unless someone wants it for their resto.

Jclark13 08-24-2015 12:35 AM

Re: 79 c30 quad cab project
 
Yes it is a 3+3 cab is what they call it iv just always called them quad cabs. I have a full set of king ranch bucket seats to put in but don't know if I wanna lose the bench seats
Posted via Mobile Device

jumpsoffrock 08-24-2015 11:50 AM

Re: 79 c30 quad cab project
 
Quote:

Originally Posted by special-K (Post 7283183)
By the responses, I guess no one else thinks that way

Yep, you're just crazy. Nothin' new. :mm:























:D

Jclark13 08-30-2015 11:47 PM

Re: 79 c30 quad cab project
 
Finally got the motor in and running
Posted via Mobile Device


All times are GMT -4. The time now is 02:44 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com