Parting 1973 Chevrolet K20
 

Here is one we just got in to part. 1973 K20 350 4 barrel, 4 speed. Engine is gone but all external parts are here such as pulleys, brackets, nuts bolts, etc.

Please respond to the thread for items listed in the thread. If you don't see what you need, please ask as we may not have listed it or have it from another truck.

This one is going to be processed and gone quick.

All prices plus shipping.

Thank you for looking,
Thomas

Clutch linkage complete. Comes with everything from the clutch pedal to the throw out fork...$50.00

Power brake booster...$40.00
Grill, not perfect some chips...$40.00
Warn locking hubs...$100.00 for the pair.
Factory jack kit complete with all mounting hardware...$40.00

Re: Parting 1973 Cevrolet K20
 

Moderator(s) can you please repair my error on the title "Cevrolet" to "Chevrolet"

Thank you very much,
Thomas

Re: Parting 1973 Chevrolet K20
 

first order of business editing done
Secondly I need the following parts off the core support
Spring and retainer that pops up hood
both rubber screw in hood height adjusters
seat belts all pieces
how much for both visors

If you will cut up the core support I need the pieces that go from above the spot where the support bolts to the frame on the outside to and including the outer grille mounts if you look in the picture of the rad support those bars that come clear over to the grille supports those smaller pieces in that second picture bolt to the whole thing I need ( somehow im going to have to weld it to a 79 support to make it work

Re: Parting 1973 Chevrolet K20
 

I need one or more of these screws, they hold the cardboard tray behind the seat, a decent (73-75 I think without the mounting bolts) windshield washer reservoir. It looks like the OEM gas cap is missing but if you might have one from another truck. My zip is 43025.

********** Also need the windshield wiper arms and the glovebox if the plastic is not damaged**********

Re: Parting 1973 Chevrolet K20
 

Passenger inner fender - rust/cancer free and straight? $$$

Passenger door panel - crack and sun rot free (some chalking ok, it's going to be recovered but needs to be solid)? $$$

Core Support - rust/cancer free? $$$

Re: Parting 1973 Chevrolet K20
 

How are the headlight bezels? I hate seeing these salvageable units dying :(

Re: Parting 1973 Chevrolet K20
 

what about dash and dash bezel?

Re: Parting 1973 Chevrolet K20
 

Let me work on your list and get back to you Monday.

The truck has a very nice set of seat belts for $125.00

I will be back with you on Monday.

Thank you,
Thomas

Re: Parting 1973 Chevrolet K20
 

If this has a manual throttle, I will buy it

Re: Parting 1973 Chevrolet K20
 

I will answer all of your questions on Monday.

Have a good weekend,
Thomas

Re: Parting 1973 Chevrolet K20
 

Is truck a 2wd or 4x4?

Re: Parting 1973 Chevrolet K20
 

I will answer for him. The truck is a 4x4. K designates a 4x4 C designates a 2wd

Re: Parting 1973 Chevrolet K20
 

Thank you for the answer. By the way I know that there is no manual throttle on this truck.

Thomas

Re: Parting 1973 Chevrolet K20
 

Thomas, thanks for getting back to me so quickly. I appreciate the response! Good luck on the part out! You always have fair prices!

Re: Parting 1973 Chevrolet K20
 

Still wondering about these...

Re: Parting 1973 Chevrolet K20
 

PM sent.

Re: Parting 1973 Chevrolet K20
 

Here you go:

Secondly I need the following parts off the core support
Spring and retainer that pops up hood $10.00
both rubber screw in hood height adjusters Rubber is dry but there $10.00 for the pair
seat belts all pieces $125.00 for the set. They are pretty nice.
how much for both visors They are there but not in great condition. I have seen worse. $30.00 for the pair

Plus shipping on all above.

I am sorry but we are not going to cut this core support up at this time.

Let me know and thank you for the interest,
Thomas

Re: Parting 1973 Chevrolet K20
 

Hi Dave,

No good on passenger inner Dave. Has front battery rot like most.

Passenger door panel may be OK for you. No cracks that I can see. Has some scratches on the top of it (like dog claw marks???) I would sell for $35.00 plus shipping

Core support is really soft on the bottom pass side near the inner fender area.

Let me know on door panel.

Thank you,
Thomas

Re: Parting 1973 Chevrolet K20
 

Here you go:

Nothing on the screws for the cardboard tray.

I have a decent washer jug (fits in a slot in the fender) Holds liquid for $15.00
I have a decent 73 gas cap for $12.50
I have a decent set of wiper arms from a 76 for $25.00 for the pair.
I have a decent glove box door. You will need your lock/latch. $15.00. It is the same color as the truck in thread. plastic is good. I also have other ones in different colors. Not sure what colors but I can check.

All prices plus shipping.

Let me know.

Thank you,
Thomas

Re: Parting 1973 Chevrolet K20
 

I'll take them, PM sent

Re: Parting 1973 Chevrolet K20
 

Not on this truck but I have a decent pair of these (some minor pitting) for $30.00 plus the shipping.

Re: Parting 1973 Chevrolet K20
 

The bezel is not good. It has been cut in the storage tray area.

The gauge cluster has a broken mounting tab on drivers side. I would take $35.00 plus shipping for it. It does not look bad but does need cleaned.

Let me know and thank you,
Thomas

Re: Parting 1973 Chevrolet K20
 

I'll take the seat belts if old Rusty passes.

I would like pics of woodgrain cluster bezel if it has one...and price please.

Re: Parting 1973 Chevrolet K20
 

You are second on the seat belts. I will let you know soon. To be fair, I will give old Rusty C10 until end of day tomorrow to decide.

No wood grain bezel for a 73/74 truck.

Thank you for the interest,
Thomas

Re: Parting 1973 Chevrolet K20
 

at this point I think im going to take a pass if you decide to cut up the core support let me know im trying to get one whole package together to finish up here