The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)

- - CA LT1 Aluminum Cylinder Heads (https://67-72chevytrucks.com/vboard/showthread.php?t=688418)

Bugeyev8

11-12-2015 11:09 PM

LT1 Aluminum Cylinder Heads

Used take off heads unknown condition now but were removed to replace with trick flow heads , Casting #12551561 listed as 1996 LT1

150$ for the pair, local pick up only

San Leandro Ca 94577

510-706-0169

call or text for pics or info

Bugeyev8

11-13-2015 07:27 PM

Re: LT1 Aluminum Cylinder Heads

100$ ?

ChiefRocka

11-13-2015 10:52 PM

Re: LT1 Aluminum Cylinder Heads

I may be interested !

Can you send me some pics ??

Bugeyev8

11-13-2015 11:40 PM

Re: LT1 Aluminum Cylinder Heads

2 Attachment(s)

Quote:

Originally Posted by ChiefRocka (Post 7375594)

I may be interested !

Can you send me some pics ??

Here John, here are some pics

Slow Build

11-14-2015 08:44 PM

Re: LT1 Aluminum Cylinder Heads

These are for Gen II blocks only. Correct?

Bugeyev8

11-14-2015 11:02 PM

Re: LT1 Aluminum Cylinder Heads

they will fit gen 1 blocks but u need to use a gen 2 intake manifold

Quote:

Originally Posted by Slow Build (Post 7376408)

These are for Gen II blocks only. Correct?

Captainfab

11-15-2015 12:23 AM

Re: LT1 Aluminum Cylinder Heads

I'm not sure how you would drive a distributor though. The GEN II SBC intakes I have seen do not have provisions for a distributor. You would have to adapt the Optispark distributor to the GEN I block.

Quote:

Originally Posted by Bugeyev8 (Post 7376559)

they will fit gen 1 blocks but u need to use a gen 2 intake manifold

Bugeyev8

11-16-2015 12:37 AM

Re: LT1 Aluminum Cylinder Heads

Quote:

Originally Posted by Captainfab (Post 7376661)

I think you are right....been away from older sbc for a few years

ChiefRocka

11-16-2015 04:04 PM

Re: LT1 Aluminum Cylinder Heads

I think these heads would be perfect to replace my Road master LT1 iron heads

Bugeyev8

11-16-2015 08:32 PM

Re: LT1 Aluminum Cylinder Heads

Quote:

Originally Posted by ChiefRocka (Post 7378312)

I think these heads would be perfect to replace my Road master LT1 iron heads

Come and get them outta my garage !

All times are GMT -4. The time now is 03:50 AM.