Pulling the motor
 

Ok so I have everything disconnected in the Yukon. I lifted the motor and the oil pan isint clearing the cross member before the top of the intake hits the fire wall. Do I need to remove the tranny cross member to give the motor and tranny more tilt? Or am I doing something wrong here?

Re: Pulling the motor
 

I would..that thing will be nearly vertical coming out if your pulling it all together.

Re: Pulling the motor
 

Ugh.... More damn bolts to remove...haha

Re: Pulling the motor
 

I hear ya on the bolt thang..my 81 c30 has 26 bolts on the trans crossmember..

Re: Pulling the motor
 

I cannot fathom this. I would like to see pictures of this. got any?

Re: Pulling the motor
 

I don't have any pics but there's 4 in the top frame rail, 4 in the bottom frame rail , and 4 more for the crossmember brace...on each side..plus 2 more for the trans mount..

Re: Pulling the motor
 

OH OH OH! ok i get it. I was trying to figure out what kinda jungle gym you had installed that needed that many bolts. now that you have described it like that it totally makes sense now. I only have 6 bolts. lol

Re: Pulling the motor
 

6 bolts!..I wish..ha ha..thank God for cordless impacts and air ratchets..

Re: Pulling the motor
 

No kidding I was dreading pulling this cross member till I remembered I have an impact!! Guess I better go get this done.....