Parting '78 c10 swb fleetside
 

ALL PARTS FROM THIS TRUCK ARE SOLD

Pretty good condition '78 Swb fleetside c10 bed, chassis and motor only. This week only - $350 for swb chassis, bed, motor.

The bedsides are very straight with a small amount of rust bubbling up behind wheel wells (typical for these trucks). Slight crease in from of wheel well on driver's side. The bed floor has surface rust but solid. Some heavy rust near stake pocket on driver's side. I'll help you load. - $450 new price $350

305 motor dirty but complete (turns over) code dates to 1983 - $150

Have other parts listed below for extra.

Sliding rear window (pulled from cab) - $75

Driver's inner fender - No rust through - $35

Dash bezel - Great condition with no cracks - $40

Dash plaque with custom deluxe plate - $40

Gauge cluster with idiot lights - needs good cleaning with light surface rust on tins but functional - $35

Steering column - non-tilt with new lock cylinder and keys - $100 complete with driver quality (and sticky) steering wheel and guts

White painted front and rear bumpers - $50 each (both have slight tweaks but are relatively straight)

Core Support (no rust through) with headlights - $75

Filler panel below grille including running lights - $50

Hood is bent (imagine that!) and passenger fender on truck is damaged.

Re: Parting '78 c10 swb fleetside
 

Can you get better close ups of head light bezels. Also interested in upper and lower grill trim if not kinked.

Thanks, Nate

Re: Parting '78 c10 swb fleetside
 

Will do first thing in the morning. I don't believe the trim is kinked but I'll confirm and provide pics. In the meantime, not sure if this picture helps.
http://i1300.photobucket.com/albums/...psxx72jis2.jpg

Re: Parting '78 c10 swb fleetside
 

Pics of the headlight bezels and the upper/lower grille trim. No kinks, dents or dings to speak of. A slight blemish on the left side of the lower trim. Could use a good cleaning/polishing. Bezels are a little damp from dew.

http://i1300.photobucket.com/albums/...psgbkx80tk.jpghttp://i1300.photobucket.com/albums/...psjtnhpqsm.jpg
http://i1300.photobucket.com/albums/...ps6zt9f76e.jpg
http://i1300.photobucket.com/albums/...psjp9od5xr.jpg
http://i1300.photobucket.com/albums/...pslf88mp7x.jpg
http://i1300.photobucket.com/albums/...psaouab83o.jpg
http://i1300.photobucket.com/albums/...psxmyzpr3h.jpg
http://i1300.photobucket.com/albums/...pswfz50bah.jpg

Re: Parting '78 c10 swb fleetside
 

Pm replied,

Nate

Re: Parting '78 c10 swb fleetside
 

Responded.

Re: Parting '78 c10 swb fleetside
 

I'm interested in the sliding rear window but, I can't get the pictures to open up. Is this a factory window in nice shape or ?

Re: Parting '78 c10 swb fleetside
 

I'm sorry about the pics. Photobucket has messed up and won't let me access my photos. I'll get more up asap. To my knowledge, yes, the sliding rear window is factory. It's in good condition and looks like it's been there for a good while if not all it's life. It opens, shuts and latches like it should.

This is the best pic of it at this point. better pics.
http://i1376.photobucket.com/albums/...psihz5eljl.jpg
http://i1376.photobucket.com/albums/...ps7emao9wa.jpg
http://i1376.photobucket.com/albums/...psbjwgcdfh.jpg

Re: Parting '78 c10 swb fleetside
 

Robbie, your pm box is full.

Nate

Re: Parting '78 c10 swb fleetside
 

Thanks! All clear now.

Re: Parting '78 c10 swb fleetside
 

Does it still have the ashtray insert?

Re: Parting '78 c10 swb fleetside
 

I believe so. Is this what you're looking for?

http://i1376.photobucket.com/albums/...psjxbxgcpv.jpg

Re: Parting '78 c10 swb fleetside
 

That's different looking. No like this:

Re: Parting '78 c10 swb fleetside
 

Don't think I have that but will double-check.

Re: Parting '78 c10 swb fleetside
 

It will be in the flip down on the dash, on the right, between the radio and glove box.

Re: Parting '78 c10 swb fleetside
 

Thanks! I flipped down the ashtray this morning and nothing was behind it other than that big cast thing I showed you this morning. I don't think the insert survived the life of this truck.

Re: Parting '78 c10 swb fleetside
 

still parting. let me know what you need.

Re: Parting '78 c10 swb fleetside
 

Still pulling parts.

Re: Parting '78 c10 swb fleetside
 

Would you sell just the steering wheel? Or have any others (67-72) tucked away? Looking for a decent driver one for a 1971 flatbed better than the one that's in it.

Re: Parting '78 c10 swb fleetside
 

Sure. I actually have one from the 78 (with no horn button), one from a 67/68 that is in decent shape with no horn button, and one from a 69 that is in a little more rough shape and has horn button. That said, I believe they are all in better condition than the one on your truck but the 67/68 is a faded blue adn would probably look the best.

Pics of each

1969 c10 green wheel
http://i1300.photobucket.com/albums/...pslpeciopv.jpg

67/68 bluish green wheel
http://i1300.photobucket.com/albums/...ps2njfsbi4.jpg
http://i1300.photobucket.com/albums/...psuk3hflec.jpg

1978 c10 black wheel
http://i1376.photobucket.com/albums/...pshna6dzg7.jpg

Re: Parting '78 c10 swb fleetside
 

New price on the short fleet bed and chassis

Re: Parting '78 c10 swb fleetside
 

TTT chassis and bed are still available but only thing left intact. The rear sliding window is available and assorted other parts. Let em know what you need.

Re: Parting '78 c10 swb fleetside
 

Chassis bed and motor available for $350 together this week only! Need to move this out of my driveway.

Re: Parting '78 c10 swb fleetside
 

Robbie, I think I can use this. Can you give me a call today? Thanks

Re: Parting '78 c10 swb fleetside
 

Thanks for chatting, Chuck. Happy we were able to strike a deal. Pending trade/sale.