The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)
-   -   Brake booster clearance (https://67-72chevytrucks.com/vboard/showthread.php?t=736709)

mild68 04-29-2017 09:14 PM
Brake booster clearance
 
1 Attachment(s)
I have a 6.0 in a 68. I'm going to get a new brake booster/master combo. Is there enough clearance between the coil and brake booster with an 11" booster?
I see there is a single diaphragm 9 inch booster available now for LS swaps. Should I use a smaller booster?
Can you post pictures of clearance?
thanks

mongocanfly 04-29-2017 09:45 PM
Re: Brake booster clearance
 
Have you checked into hyroboost as a option?..especially if you've got a clearance or vacuum issue

mild68 04-29-2017 09:58 PM
Re: Brake booster clearance
 
I'm not interested in hydroboost.
A vacuum booster is good enough for me.

homemade87 04-30-2017 06:38 AM
Re: Brake booster clearance
 
I had the same problem but not in a truck . I got the dual 8" booster and seems to work just fine . I would think they make one for your truck as well .

sprint_9 04-30-2017 01:15 PM
Re: Brake booster clearance
 
1 Attachment(s)
Here is a pic of mine with a stock replacement booster. I dont have coils on my heads but they should fit ok.

solidaxel 04-30-2017 03:43 PM
Re: Brake booster clearance
 
1 Attachment(s)
I am sure you will have enough room with a stock booster in the stock location
This is on the next series chevy truck and all stock brake system

72MARIO 04-30-2017 08:11 PM
Re: Brake booster clearance
 
There is not enough room for the full 6000 vortec cover to clear the big booster on my 1968 suburban


All times are GMT -4. The time now is 12:25 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com