Need Advice on Roll Pan
 

Need advice on what to do with this roll pan its stainless steel 2 slots cut in it roughly 6-1/2 wide. By 1-3/8
I will need reverse lights to pass a inspection. Not sure where I can find something that would work and look cool. Any advice would be appreciate it thank you !!
Posted via Mobile Device

Re: Need Advice on Roll Pan
 

Actually looks good paint the gas tank black and bring the exhaust tips up closer to the roll pan you can put lights where the top of the bed rail rolls over maybe in there whith a little tint they may just disappear

Re: Need Advice on Roll Pan
 

Hey Thx for the advice OARNGESI... That is my plan to paint the fuel tank black, but i like your exhaust advice, what i really need is to fill those slots in the roll pan with some sort of lights. I was thinking something like this??

Attachment 1673007

Re: Need Advice on Roll Pan
 

https://www.walmart.com/ip/LED-Light...&wl13=&veh=sem

https://www.walmart.com/ip/Pilot-Aut...&wl13=&veh=sem

http://www.jpcycles.com/product/3400...SABEgKsFPD_BwE

Re: Need Advice on Roll Pan
 

If they fit use them any chance they are big enough to use as. Exhaust cut outs?

Re: Need Advice on Roll Pan
 

Anybody have any ideas for me?