The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - IN WTB 15 x 8 6-lug steel wheels (https://67-72chevytrucks.com/vboard/showthread.php?t=750449)

DANTIP

11-13-2017 09:44 PM

WTB 15 x 8 6-lug steel wheels

Beginning to look for a set of 6-lug 15" x 8" steel wheels that accept the dog-dish center cap. This is for a '71 K10.

Thx!

too much stuff

11-13-2017 11:49 PM

Re: WTB 15 x 8 6-lug steel wheels

May have a set of 4 to part with. Would be in the $400 plus ship range if you want me to look them over. They will probably need blasting and paint.

Msaslp

11-14-2017 12:35 AM

Re: WTB 15 x 8 6-lug steel wheels

I have a set of 6 lug 15x8 steel rally wheels with center caps and trim rings. I actually think there is 5 of them total. Only 4 caps and rings. I would be interested in selling them or trading them. Do you have anything to trade?

DANTIP

11-14-2017 07:44 AM

Re: WTB 15 x 8 6-lug steel wheels

Quote:

Originally Posted by too much stuff (Post 8081976)

May have a set of 4 to part with. Would be in the $400 plus ship range if you want me to look them over. They will probably need blasting and paint.

I'm interested, please post or email a few pics. I'll PM my email address to you.

Dan

flashed

11-14-2017 08:16 AM

Re: WTB 15 x 8 6-lug steel wheels

Would standard 6 lug wheels widened to 8" wheels be desirable ,a guy not far from me does a great job widening wheels . Im about to get him to widen a set for a K10 we just bought .

sambrutay

11-14-2017 09:59 AM

Re: WTB 15 x 8 6-lug steel wheels

check with Jeff Cooper
Cooper Restorations

too much stuff

11-18-2017 09:26 PM

Re: WTB 15 x 8 6-lug steel wheels

5 Attachment(s)

Dug them out today for pics. May have some pitting on a couple after blasting. I don't see any curb rash on them, but can look them over again. Let me know either way.
Eric

DANTIP

11-20-2017 05:05 PM

Re: WTB 15 x 8 6-lug steel wheels

Quote:

Originally Posted by too much stuff (Post 8085548)

Dug them out today for pics. May have some pitting on a couple after blasting. I don't see any curb rash on them, but can look them over again. Let me know either way.
Eric

I'm going to pass for now. I'm told the wheels are now being reproduced.

Dan

a1vintage69

11-20-2017 09:51 PM

Re: WTB 15 x 8 6-lug steel wheels

Quote:

Originally Posted by DANTIP (Post 8086698)

I'm going to pass for now. I'm told the wheels are now being reproduced.

Dan

Dan, let us know who makes these wheels now. Thanks, a1

jimer1964

11-20-2017 10:15 PM

Re: WTB 15 x 8 6-lug steel wheels

Quote:

Originally Posted by too much stuff (Post 8085548)

Dug them out today for pics. May have some pitting on a couple after blasting. I don't see any curb rash on them, but can look them over again. Let me know either way.
Eric

Some one will grab these up if they were closer I would be interested

sambrutay

11-21-2017 05:53 AM

Re: WTB 15 x 8 6-lug steel wheels

https://www.wheelvintiques.com/15x8-...backspace.html

tjsblazer

11-21-2017 10:02 PM

Re: WTB 15 x 8 6-lug steel wheels

Quote:

Originally Posted by sambrutay (Post 8087038)

https://www.wheelvintiques.com/15x8-...backspace.html

Just FYI, all the 15x8 OE wheels that I have had are 3.875" backspacing. Those are 4.25". Not sure if being set in 3/8" more will make a difference or not to clearance at a tie rod end or another component.

Elliot949

11-25-2017 06:47 PM

Re: WTB 15 x 8 6-lug steel wheels

Quote:

Originally Posted by sambrutay (Post 8087038)

https://www.wheelvintiques.com/15x8-...backspace.html

You want to be careful with the Vintique wheels... they have a 4.25 BS where the Factory has 3.75 BS... That can be a problem... My 67 2wd can't take more that the 3.75...

Just a Heads Up...

sambrutay

11-27-2017 08:58 AM

Re: WTB 15 x 8 6-lug steel wheels

also can be had with 4" back spacing

62-580604 15x8 6x5.5

http://www.jegs.com/i/Wheel-Vintique...80604/10002/-1

All times are GMT -4. The time now is 09:12 PM.