The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Dash change, thoughts/ feedback? (https://67-72chevytrucks.com/vboard/showthread.php?t=756901)

rip2174 02-11-2018 08:40 PM

Dash change, thoughts/ feedback?
 
4 Attachment(s)
So I wanted to upgrade my interior. Went with some of the TMI products. Digging the slight change to dash pad. Got some new gauges. Thinking about changing the layout. I'm also looking for AC vents the same size as the gauges. Here is my first mock up. Thoughts? good bad or ugly is fine with me. I have a Lokar shift indicator that Ill probably mount above the two center gauges or below them.
Attachment 1751338Attachment 1751339
Attachment 1751340Attachment 1751341

Mattchu60 02-11-2018 11:07 PM

Re: Dash change, thoughts/ feedback?
 
I dig it! I think the dash and wheel design works with the gauges. I like the TMI dash - looks good.

I do wonder how you plan to make the A/C vent work in that spot though.

What brand are the gauges?

rip2174 02-11-2018 11:17 PM

Re: Dash change, thoughts/ feedback?
 
Quote:

Originally Posted by Mattchu60 (Post 8185548)
I dig it! I think the dash and wheel design works with the gauges. I like the TMI dash - looks good.

I do wonder how you plan to make the A/C vent work in that spot though.

What brand are the gauges?

Speedhut gauges. Ill be cutting the old back piece to make room for vents. It looks like the left side will be ok, but right side, might have to reinforce the dash metal somehow.

hatzie 02-12-2018 12:25 AM

Re: Dash change, thoughts/ feedback?
 
Can you flatten a round tube to an oval to fit through the dash and use flexible hose to the vent?
Econoboxes from GM, Ford, Chrysler, Toyota, Subaru, VW, Mazda, ... may be sources of long thin-wall oval--ish dash vent tubes to slide through narrow spaces.

rip2174 02-12-2018 07:30 AM

Re: Dash change, thoughts/ feedback?
 
Quote:

Originally Posted by hatzie (Post 8185647)
Can you flatten a round tube to an oval to fit through the dash and use flexible hose to the vent?
Econoboxes from GM, Ford, Chrysler, Toyota, Subaru, VW, Mazda, ... may be sources of long thin-wall oval--ish dash vent tubes to slide through narrow spaces.

Good idea. Ill look into that.

jkk 02-12-2018 07:44 AM

Re: Dash change, thoughts/ feedback?
 
Cool

hatzie 02-12-2018 08:33 AM

Re: Dash change, thoughts/ feedback?
 
Quote:

Originally Posted by rip2174 (Post 8185735)
Good idea. Ill look into that.

It's the true spirit of hot rodding. It doesn't matter where you find the parts as long as you can massage them to fit well, work reliably, and look good.

rickit 02-12-2018 09:47 AM

Re: Dash change, thoughts/ feedback?
 
l like that a lot! getting ready to change mine as well along with the complete interior, could u post a few pics of your dash pad on passenger side? been trying to get ideal of what the tmi looks like installed

blazer2007 02-12-2018 11:18 AM

Re: Dash change, thoughts/ feedback?
 
I did something similar and looked cool for awhile but went back to a stock looking panel with recessed aftermarket gauges, I like it better now.

rip2174 02-12-2018 12:22 PM

Re: Dash change, thoughts/ feedback?
 
Quote:

Originally Posted by rickit (Post 8185818)
l like that a lot! getting ready to change mine as well along with the complete interior, could u post a few pics of your dash pad on passenger side? been trying to get ideal of what the tmi looks like installed

All get some pictures tonight. Here is a video of TMI full interior from LMC install. Dash starts at like 6 minutes.

https://www.youtube.com/watch?v=PrYf1955jZE

rip2174 02-12-2018 12:22 PM

Re: Dash change, thoughts/ feedback?
 
Quote:

Originally Posted by blazer2007 (Post 8185893)
I did something similar and looked cool for awhile but went back to a stock looking panel with recessed aftermarket gauges, I like it better now.

Have any pics of old setup and new?

rip2174 02-12-2018 09:21 PM

Re: Dash change, thoughts/ feedback?
 
3 Attachment(s)
Quote:

Originally Posted by blazer2007 (Post 8185893)
i did something similar and looked cool for awhile but went back to a stock looking panel with recessed aftermarket gauges, i like it better now.

Attachment 1751845Attachment 1751846
Attachment 1751847

rip2174 02-12-2018 09:23 PM

Re: Dash change, thoughts/ feedback?
 
1 Attachment(s)
Attachment 1751848

blazer2007 02-12-2018 10:13 PM

Re: Dash change, thoughts/ feedback?
 
1 Attachment(s)
Quote:

Originally Posted by rip2174 (Post 8185948)
Have any pics of old setup and new?

can,t find the old but here is the new one in progress, need new lens. Don,t get me wrong, yours looks good but I just liked the semi original look. I just wanted aftermarket gauges as I spent too much money on the motor. My first one looked too race carish and and the dash looked too busy,to much stuff. I like the simple look,I just have to get rid of the air bag gauges some how on mine.

Nick_R_23 02-12-2018 10:32 PM

Re: Dash change, thoughts/ feedback?
 
Absolutely love the stitched dash pad.

rip2174 02-13-2018 07:20 AM

Re: Dash change, thoughts/ feedback?
 
Quote:

Originally Posted by blazer2007 (Post 8186449)
can,t find the old but here is the new one in progress, need new lens. Don,t get me wrong, yours looks good but I just liked the semi original look. I just wanted aftermarket gauges as I spent too much money on the motor. My first one looked too race carish and and the dash looked too busy,to much stuff. I like the simple look,I just have to get rid of the air bag gauges some how on mine.

I like that pocket up on the right. I was thinking about putting one where the stereo is.

hatzie 02-13-2018 08:37 AM

Re: Dash change, thoughts/ feedback?
 
Where are you putting the heater controls?

blazer2007 02-13-2018 09:01 AM

Re: Dash change, thoughts/ feedback?
 
no heater, summer only

vespaholic 02-13-2018 09:08 AM

Re: Dash change, thoughts/ feedback?
 
Dash pad looks great!

hatzie 02-13-2018 10:10 AM

Re: Dash change, thoughts/ feedback?
 
You may regret that when the windshield fogs on cool spring and fall evenings.

blazer2007 02-13-2018 10:31 AM

Re: Dash change, thoughts/ feedback?
 
It,s been 10 years, no problems yet, this getting away from the original subject.

Palf70Step 02-13-2018 10:55 AM

Re: Dash change, thoughts/ feedback?
 
I personally, till now, have never seen that dash combo and it look really good to me.

rip2174 02-13-2018 11:36 AM

Re: Dash change, thoughts/ feedback?
 
Quote:

Originally Posted by hatzie (Post 8186717)
Where are you putting the heater controls?

Going to build a console. Putting a Dakota digital controller in there along with some other electronic controls.

rip2174 02-13-2018 11:37 AM

Re: Dash change, thoughts/ feedback?
 
Quote:

Originally Posted by vespaholic (Post 8186734)
Dash pad looks great!

Thanks

rip2174 02-13-2018 11:38 AM

Re: Dash change, thoughts/ feedback?
 
Quote:

Originally Posted by Palf70Step (Post 8186824)
I personally, till now, have never seen that dash combo and it look really good to me.

Thanks


All times are GMT -4. The time now is 08:43 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com