The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Updates a few days after having the “new” Truck (https://67-72chevytrucks.com/vboard/showthread.php?t=766920)

screamin86 07-05-2018 10:18 PM

Updates a few days after having the “new” Truck
 
5 Attachment(s)
So I made a new member post a few days ago but nothing on the main feed. I picked up a 69 swb step side c10 this week! Drug her from the woods all 4 wheels locked and tires flat. With the heat and the Holliday I haven’t gotten a lot done but I did get it hosed off and rolled around under it checking the floors. What I know so far is it has a v8 aluminum intake 750 Holley longtubes dusk exhaust with glasspacks pretty sure it’s a Saginaw 3 speed but the truck was originally a 6cyl 4 speed. Still has the forward shifter hole in the floor covered with a speaker HA! Needs a lot of engine bay wiring it’s been butchered. Oh and it’s a leaf spring Truck which I was surprised by. Anyway I’ll keep updating here are some pics.
Posted via Mobile Device

screamin86 07-05-2018 10:22 PM

5 Attachment(s)
Oh I also found the original owners manual and warranty pamphlet with protect-o-plate and a bunch of old documents in the dash. Pretty excited about that. Anyway more pics of clean up.
Posted via Mobile Device

1968aj 07-05-2018 10:46 PM

Re: Updates a few days after having the “new” Truck
 
looks like a good project. probly just me but that's the only stepside I can remember with a cargo light.

screamin86 07-05-2018 11:03 PM

Quote:

Originally Posted by 1968aj (Post 8295039)
looks like a good project. probly just me but that's the only stepside I can remember with a cargo light.

I do know it was ordered as a cab/chassis for a utility company so who knows.
Posted via Mobile Device

BRL 07-06-2018 03:03 AM

Re: Updates a few days after having the “new” Truck
 
Quote:

Originally Posted by 1968aj (Post 8295039)
looks like a good project. probly just me but that's the only stepside I can remember with a cargo light.

Oh and sliding back glass too.

NEAT!

Looks like lots of grease and cussin'and sore knuckles and fun in your near future Sir! :D

Very helpful folks here. :cool:

Perpendicular 07-06-2018 07:06 AM

Re: Updates a few days after having the “new” Truck
 
Gonna be cool!

special-K 07-06-2018 07:22 AM

Re: Updates a few days after having the “new” Truck
 
Looks like someone parked a decent truck for whatever reason and there it sat! The cargo lamp makes me curious as well. I figure whoever fixed it up before installed it.

yuccales 07-06-2018 07:58 AM

Re: Updates a few days after having the “new” Truck
 
Got the makings of something good there.

raggedjim 07-06-2018 10:06 AM

Re: Updates a few days after having the “new” Truck
 
It has frenched antenna and taillights, so it was loved at one time. Glad to see it coming back.

Good luck, Rg

Ol Blue K20 07-06-2018 12:09 PM

Re: Updates a few days after having the “new” Truck
 
Looks like a nice project!

screamin86 07-06-2018 03:48 PM

Re: Updates a few days after having the “new” Truck
 
Yeah hate that it was parked like it was but what can ya do? Picked up some used tires for it today so I can move it around. Hope to try to start it this weekend also. Future plans will probably be getting my boost ready gen4 5.3 I have and a 4l80e and make a daily out of it. Possibly single turbo later. Going to need cab supports and rockers at a minimum though.
Posted via Mobile Device

Mike C 07-06-2018 03:56 PM

Re: Updates a few days after having the “new” Truck
 
I'd have been all over that! It is a high hump cab I presume? Post up a picture of the SPID.

screamin86 07-07-2018 09:55 PM

Quote:

Originally Posted by Mike C (Post 8295451)
I'd have been all over that! It is a high hump cab I presume? Post up a picture of the SPID.

Sadly the SPID is pretty wrecked from the glove box door being left open for years.
Posted via Mobile Device

screamin86 07-09-2018 11:47 PM

3 Attachment(s)
Got my used tires mounted today! Also got the engine to turn over by hand and then with a bump switch. Out power to the coil but not getting spark. Going to try and investigate more tomorrow. I do know the engine bay wiring needs redone it’s a disaster I’m surprised if it ever ran. Truck is currently sitting on some 31x10.5 and 33x10.5 tires and steel wheels that were in the bed of the truck...
Posted via Mobile Device

Arnulfo 07-10-2018 12:38 AM

Re: Updates a few days after having the “new” Truck
 
I like the dog and the window stickers.

screamin86 07-10-2018 02:01 AM

1 Attachment(s)
Thank you! The dogs aren’t quite sure how to take this truck so far.
Posted via Mobile Device


All times are GMT -4. The time now is 04:20 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com