The 1947 - Present Chevrolet & GMC Truck Message Board Network - Other Location Not Listed Need trany links and levers

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)

- - Other Need trany links and levers (https://67-72chevytrucks.com/vboard/showthread.php?t=768622)

Joerg

08-01-2018 10:50 AM

Need trany rods and levers

2 Attachment(s)

I have this trany.
Should be a Munice SM 318 3 speed. Right?
I plan to change from the floor to the column
I run a 61 PU with a 235.

I need the rods, levers and the shifter. (and all the parts I dont know)
Does anybody have some laying around and will sell them?

DPowers

08-01-2018 02:55 PM

Re: Need trany links and levers

5 Attachment(s)

Have these rods that pulled from a '65. Will need new bushings.
Do you need the column parts too?

Joerg

08-02-2018 02:13 AM

Re: Need trany links and levers

Quote:

Originally Posted by DPowers (Post 8313548)

Have these rods that pulled from a '65. Will need new bushings.
Do you need the column parts too?

Thank you, do they fit on a 61?
No I dont need the column parts except the shifter. Do you have it too?
About the brushings, do you know where I can get them?
Next question is how to put the money to you, cause I'm from Germany. I have a shipping address in the USA where the parts can be shipped and they will ship them to me or you can send them directly to me using www.ipsparcel.com. You can get the shipping quote online and request to pick up the package from your home....
I have paypal too.

So do you see any way to sell and send the rods and levers to me?

Thank you
Joerg.

shortstep60

08-02-2018 05:37 AM

Re: Need trany links and levers

Just to let you no the column is different on a 61 the turn single switch works off of a cable. I have the column and the levers and the rods out off a 61 $ 150.00 plus shipping. If DPowers cant fix you up then let me no thanks

DPowers

08-02-2018 07:16 AM

Re: Need trany links and levers

Shortstep60 would probably be your best bet then as the only thing I have are the rods.

Joerg

08-02-2018 11:02 AM

Re: Need trany links and levers

Quote:

Originally Posted by shortstep60 (Post 8314016)

Hi shortstep60,
do you have a shifter too?
I'll PM you.

Thanks
Joerg

Joerg

08-02-2018 11:11 AM

Re: Need trany links and levers

Quote:

Originally Posted by DPowers (Post 8314037)

Shortstep60 would probably be your best bet then as the only thing I have are the rods.

Thank you DPowers, I'll contact shortstep60.

shortstep60

08-02-2018 12:23 PM

Re: Need trany links and levers

I should have everything will check it out and get back with you thanks

shortstep60

08-02-2018 03:31 PM

Re: Need trany links and levers

I have everything but the levers that go on the trans

Joerg

08-02-2018 03:50 PM

Re: Need trany links and levers

Quote:

Originally Posted by shortstep60 (Post 8314312)

I have everything but the levers that go on the trans

What does that mean? everything but the levers that go on the trans?
Are they missing or what.
Sorry but I dont understand that.
Does that mean yo dont have the levers?

shortstep60

08-03-2018 05:32 AM

Re: Need trany links and levers

I have everything but the trans levers

Joerg

08-03-2018 05:48 AM

Re: Need trany links and levers

Quote:

Originally Posted by shortstep60 (Post 8314685)

I have everything but the trans levers

Please check your Private Messages.

Thank you

Joerg

08-03-2018 02:17 PM

Re: Need trany links and levers

shortstep60 I dont know what happen, I send it again....take a look

All times are GMT -4. The time now is 12:33 PM.