1970 C10 Project
 

I am selling my 1970 C10 project. It is currently disassembled. More pictures will be added as time allows. I have a title for the frame and a bill of sale for the cab. This is all you need to do a cab swap legally in PA and get a new vin number, if you are concerned about that sort of thing. There are obviously other, easier ways around it.
The frame has been modified using a NoLimit rear frame rail kit, which gives 4 inches of drop without any suspension mods. I also have new trailing arms from POL, and transmission and trailing arm cross members from CPP. The 6 lug set up has been removed and everything to replace it with 5 lug front and rear from a 1972 C10 is present. The 6 lug rear has 3.73 gears and the 5 lug has 3.23 so you have your choice of ratios. I already started cleaning and painting the front parts. A budget air ride kit from AZ Pro Performance is included as I was planning on air ride. The cab needs minor floor and rocker repair but is otherwise in very good shape. Doors are also included that need minor repair and mirror holes filled. Front inner and outer fenders, hood, and radiator support are in very good shape and need no repair. Basically, everything is here other than bed and drivetrain to build a very cool truck that can drive inches off the ground and still handle well. I also have a pile of extra parts as you can see in the pictures such as a cab dolly, grille, fender, door, late model bench seat, wheels, driveshaft for a th400, weather resistant outdoor cover, etc. Everything you want from this can be included. Everything you want from this can be included. I really do want to get rid of all these extra parts.
I will consider reasonable offers from people who actually show up and look over everything in detail since I now need the money for 1967 Buick GS. Do the math and you will see there is over $3000 worth of new suspension parts here. The only items I will consider as part of a trade is a car trailer or a GearVendors. I can also help move parts of you don't live too far away. Some of the other general parts I have available for extra are a B&M 144 blower and carburetors.

Looking to get $4500 OBO
If anybody is interested I can bolt the front and rear suspension and cab on if you want. Just need body mount bushings and ball joints.

Re: 1970 C10 Project
 

More

Re: 1970 C10 Project
 

pictures

Re: 1970 C10 Project
 

If enough people are interested I will consider parting this out in sections(frame, cab and doors, front clip, suspension, extra parts)
I might be losing my storage place for this so it needs to go one way or another.

Re: 1970 C10 Project
 

How much for the trailing arms?

Re: 1970 C10 Project
 

Asking $300. Just so you know I am working on getting shipping quoted for another member.

Re: 1970 C10 Project
 

no problem

Re: 1970 C10 Project
 

Do you have a rear chrome bumper?

Re: 1970 C10 Project
 

No, I do not.

Re: 1970 C10 Project
 

Arms were sold. Thanks for the inquiry.

Re: 1970 C10 Project
 

would you have any solid drip rails ? thanks

Re: 1970 C10 Project
 

I do not.

Re: 1970 C10 Project
 

Do you have a good passenger side fender set?(inner and outer), and if so how much to ship to 32054?

Re: 1970 C10 Project
 

All I have is an inner fender.

Re: 1970 C10 Project
 

Well its a start. How much for the inner fender?

Re: 1970 C10 Project
 

I just checked on it and it is actually a driver side inner fender.

Re: 1970 C10 Project
 

do all 4 wheel rings look that good and will you sell them? also is that a full set of brake lines laying there?

Re: 1970 C10 Project
 

Wheels and rings have been sold. Those are fuel lines that I need for my truck.

Re: 1970 C10 Project
 

10/4 thank you

Re: 1970 C10 Project
 

This truck is in the process of being parted out. People interested in parts should respond to my post in the Parts For Sale section so we don't muck up the trucks for sale section of the forum with part sales. Moderators, feel free to close this thread.